N64:Connector Pinouts
Jump to navigation
Jump to search
N64 A/V Connector Pinout
Main article:Nintendo Multi Out
Controller
Looking at the front of the console, pins are numbered left to right.
Pin | Name |
---|---|
1 | VCC +3.3v |
2 | Data |
3 | GND |
Cartridge
Looking at the top of the console with controller ports facing you. Pin 1 is lower left, pin 26 upper left.
Pin | Name | Description | Pin | Name | Description |
---|---|---|---|---|---|
1 | GND | 26 | GND | ||
2 | GND | 27 | GND | ||
3 | AD15 | 28 | AD0 | ||
4 | AD14 | 29 | AD1 | ||
5 | AD13 | 30 | AD2 | ||
6 | GND | 31 | GND | ||
7 | AD12 | 32 | AD3 | ||
8 | WR | Write | 33 | ALE_L | Address latch low bits |
9 | 3.3v | 34 | 3.3v | ||
10 | RD | Read | 35 | ALE_H | Address latch high bits |
11 | AD11 | 36 | AD4 | ||
12 | AD10 | 37 | AD5 | ||
13 | 12v | 38 | 12v | ||
14 | 12v | expansion port | 39 | 12v | Expansion port |
15 | AD9 | 40 | AD6 | ||
16 | AD8 | 41 | AD7 | ||
17 | 3.3v | 42 | 3.3v | ||
18 | CIC_15 | CIC → PIF Data | 43 | CIC_14 | PIF <- CIC Data |
19 | CIC_11 | 1.95MHz clock (PIF driven) | 44 | ? | JTAG_CLK_R4300 or INT |
20 | RESET | 45 | NMI | ||
21 | EEPROM_DAT | 46 | CSYNC | ||
22 | GND | 47 | GND | ||
23 | GND | 48 | GND | ||
24 | SL | Audio Left | 49 | SR | Audio Right |
25 | GND | 50 | GND |
Controller Accessory Port
When looking at the bottom of the controller with the tines facing down, Pin 1 is the lower left (latch side,) Pin 17 is the upper left (wire side.)
Pin | Name | Pin | Name |
---|---|---|---|
1 | GND | 17 | GND |
2 | A14 | 18 | CE? |
3 | A12 | 19 | A15 |
4 | A7 | 20 | WE |
5 | A6 | 21 | A13 |
6 | A5 | 22 | A8 |
7 | A4 | 23 | A9 |
8 | A3 | 24 | A11 |
9 | A2 | 25 | OE |
10 | A1 | 26 | A10 |
11 | A0 | 27 | D7 |
12 | D0 | 28 | D6 |
13 | D1 | 29 | D5 |
14 | DETECT | 30 | D4 |
15 | 3.3v | 31 | 3.3v |
16 | D2 | 32 | D3 |