PSP:Connector Pinouts

From ConsoleMods Wiki
Jump to navigation Jump to search

Mini USB Port (All Models except N1000)

Pin Name Cable color Description
1 VCC Red +5 VDC
2 D- White Data -
3 D+ Green Data +
4 Sense N/A USB OTG ID

Normally unused on PSP series. This is used for jigkicks on a PSP-E1000 as the Baryon K Line.

5 GND Black Ground

PSP Go (N1000) USB Port

Pin Name Description
1 GND
2 ACCESSORY_USB_SUPPLY_3V3 Used on N440 Converter Cable Adapter to power USB accessories
3 EXTERNAL_MIC_IN
4 POMMEL BALL M1
5 AUD_L
6 Backlight IC ball C1
7 GND
8 AUD_R
9 GND
10 ENABLE_AUDIO_MULTIOUT
11 GND
12 GND
13 Pr / COMPOSITE_VIDEO
14 CABLE_TYPE_SENSE_1 Used in jigkick as TX
15 CABLE_TYPE_SENSE_2
16 Y / S-VIDEO_Y
17 Backlight IC ball D4 Used in jigkick as RX
18 Backlight IC ball B2
19 Cb / S-VIDEO_C
20 DET_5V_CRADLE Apply +5v through 10kOhm resistor to enable pin 22
21 DET_USB_CABLE_CONNECTED
22 5V_INPUT Apply +5v when enabled to charge battery or power board if no battery
23 Backlight IC ball A6
24 SYSCON_TOH0 Ground while powered off to enable jigkick
25 GND
26 USB_D+
27 USB_D-
28 GND

Memory Stick (Duo & Pro Duo)

1 VSS Vss
2 BS Bus state signal
3 DATA1 Data1 Parallel / NC Serial
4 SDIO/DATA0 Data0 Parallel / Data Serial
5 DATA2 Data2 Parallel / NC Serial
6 INS Stick detect (connected to VSS)
7 DATA3 Data3 Parallel / NC Serial
8 SCLK Clock signal
9 VCC Vcc (2,7V - 3,6V)
10 VSS Vss

Memory Stick (M2)

1 BS Bus state signal
2 DATA1 Data1 Parallel / NC Serial
3 DATA0 Data0 Parallel / Data Serial
4 DATA2 Data2 Parallel / NC Serial
5 INS Stick detect (connected to VSS)
6 DATA3 Data3 Parallel / NC Serial
7 SCLK Clock signal
8 VCC Vcc (2,7V - 3,6V)
9 VSS Vss
10 Reserved
11 Reserved