Xbox:Xecuter 3
Jump to navigation
Jump to search
 | This process is dangerous and potentially can brick or fry your Xbox. It involves soldering a very small contact, so it is recommended to be experienced with soldering before proceeding. |
Xecuter 3 Features:
- Purple board color
- Comes from factory pre-flashed with FlashBIOS utility
- 2MB Flash ROM; can set up 8x256k, 4x512k, 2x1024k or a single 2048k banks
- Dedicated 256k Backup Rom (can be upgraded)
- i2c Bus for X3 Config LIVE!
- New Enhanced I/O Bus for Full LCD support and add-ons
- Flash Protection Control
- Mod Enable - Quick Press Power to boot from 2Mb Flash Rom (External LED will indicate BLUE LED)
- Mod Disable - Press Power >1 second (External LED will indicate RED LED)
- Quick Press Power+Eject >1 second to boot from 256k Backup Rom (External LED will indicate PURPLE LED)
- HDD and LAN Activity LEDs
- D0 Control (Disable Mod Via Software)
- X3 works without any switch accessories connected
- No-Solder Pogo Pin Install option available
- Emergency external programming interface
- Compatible with all BIOSes
- Compatible with Xapt3r solderless install module
LCD-Specific Features:
- Custom text Display on boot
- Display X3 Config Live Version
- Display Dip switch and selected BIOS
- XBMC and Avalaunch LCD features are compatible
Xecture 3CE Additional Features:
- White and red board color
- Alternating 5V connector which prevents the modchip from always being on when the Xbox is off in version 1.6 Xboxes
- XLCD connector is a right angle instead of straight
Full Installation Guide (Xecuter 3)
Full Installation Guide (Xecuter 3CE)