GBA:Retroglow (LEDs)

From ConsoleMods Wiki
Revision as of 01:07, 22 September 2022 by LilyDoesYourMum (talk | contribs) (instructions on how to use it)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

RGB LED Customization Guide

Mode Selection

You can cycle through several modes in this kit. Navigation through the menus is done by holding Select and pressing Left or Right. You will know you’ve entered a menu when you see the LEDs blink twice. Here are the different menu options with their respective controls, in order:

  1. Default Mode - No other controls
  2. Brightness Mode - Press Left or Right to adjust brightness level
  3. Color Mode Selection - Press Left or Right to change color mode
  4. Color Mode Edit - See Color Mode Edit below
  5. Save All Settings - No other controls. Entering this menu will save all selections and reboot the LED controller

On GBA SP, you can hold Select and press Left in default mode to change IPS kit brightness.

Color Mode Edit

In Color Mode Edit, the controls and options will change depending on which color mode you have selected. See the table below for descriptions of each mode and the different customization options available.

  1. User Preset Mode - Pick a unique color for each button
    1. Press Select once to toggle between BUTTON SELECT, HUE SELECT, and SATURATION SELECT.
    2. In BUTTON SELECT, Press Left or Right to change which button you would like to edit
    3. In HUE SELECT, Press Left or Right to change the hue.
    4. In SATURATION SELECT, Press Left or Right to change the saturation.
  2. Rainbow Color Mode - Fades between all colors and repeats
    1. Press Select once to toggle between SPEED SELECT and SATURATION SELECT.
    2. In SPEED SELECT, Press Left or Right to adjust the fade speed.
    3. In SATURATION SELECT, Press Left or Right to change the saturation.
  3. Fairy Color Mode - A rainbow fade from left to right!
    1. Press Select once to toggle between SPEED SELECT and SATURATION SELECT.
    2. In SPEED SELECT, Press Left or Right to adjust the fade speed.
    3. In SATURATION SELECT, Press Left or Right to change the saturation.
  4. Solid Color Mode - Display one color across all LEDs.
    1. Press Select once to toggle between HUE SELECT and SATURATION SELECT.
    2. In HUE SELECT, Press Left or Right to change the hue.
    3. In SATURATION SELECT, Press Left or Right to change the saturation.
  5. To save all settings, Hold Select and press Right.