LaserActive:PAC-S10 FRAM Save RAM Modification

From ConsoleMods Wiki
Revision as of 17:00, 11 July 2022 by Zaxour (talk | contribs) (Created page with "Replacing the Save RAM in the PAC-S10/S1 with an FRAM IC is the same process as the Sega/Mega CD and it's variants. ==Using the 64k FM16W08-SG== This part is a direct replacement for the original SRAM IC. Simply replace the IC with the FRAM. No pin lifting necessary. <gallery> PAC-S10 FRAM 64k.jpg|IC22 replaced with 64K FRAM </gallery> ==Using the 256k FM18W08-SG== If the 64k part is out of stock, it is also possible to use the 256k variant, but it is necessary to eit...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Replacing the Save RAM in the PAC-S10/S1 with an FRAM IC is the same process as the Sega/Mega CD and it's variants.

Using the 64k FM16W08-SG

This part is a direct replacement for the original SRAM IC. Simply replace the IC with the FRAM. No pin lifting necessary.

  • IC22 replaced with 64K FRAM

    IC22 replaced with 64K FRAM

Using the 256k FM18W08-SG

If the 64k part is out of stock, it is also possible to use the 256k variant, but it is necessary to either ground pin 1 or tie it to +5V. The /RESET signal from the battery management IC will be constant during console operation, so it is save to leave pin 26 as is. The recommended configuration is to simply jump Pin 1 to pin 28.

  • IC22 replaced with 256k FRAM

    IC22 replaced with 256k FRAM

Retrieved from "https://consolemods.org/wiki/index.php?title=LaserActive:PAC-S10_FRAM_Save_RAM_Modification&oldid=14127"