SNES:Making Controller Board Region-Free: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

7 June 2023

15 February 2023

  • curprev 07:4807:48, 15 February 2023‎ ApolloBoy talk contribs‎ m 1,783 bytes −1‎ No edit summary
  • curprev 07:4807:48, 15 February 2023‎ ApolloBoy talk contribs‎ 1,784 bytes +1,784‎ Created page with "Category:SNES The controller port PCBs in older PAL SNES consoles have four additional diodes for ESD protection placed on the data latch and clock lines (pins 2 and 3) of the controller ports. To compensate, PAL SNES controllers have pull-up resistors on these lines. However, NTSC SNES and Super Famicom controllers do ''not'' have these pull-up resistors and will not work on these PAL SNESes for this reason. Thankfully, with a trivial modification, any SNES or Supe..."
Retrieved from "https://consolemods.org/wiki/SNES:Making_Controller_Board_Region-Free"