Xbox 360:Motherboard Information

From ConsoleMods Wiki
Revision as of 19:22, 19 February 2024 by Nadaman (talk | contribs) (→‎Corona PCB)
Jump to navigation Jump to search

Xenon

The motherboard used in beta XDKs and the finalized launch models. It has a 90nm CPU, GPU, and eDRAM. Some boards sent into Microsoft receieved a fixed version of the 90nm Y1 GPU. Commonly has leaky 16v 1500µF and 6.3v capacitors.

Images

Xbox 360 Xenon Top.png Xbox 360 Xenon Bottom.png



Schematics

Boardviews

Xenon (Final)

Xenon (-008 Beta XDK PCB)

Capactior Map

XenonCapMap.png

Elpis

Officially referbished Xenon with an 80nm GPU. These boards are known to be reliable, but still suffer from the Xenon's capacitor problem.

Images

JFT-XBOX360-Elpis-Top-20240121.png JFT-XBOX360-Elpis-Bottom-20240121.png

Schematics

Refer to the Xenon schematics, as they are the same PCB.

Boardview

Refer to the final Xenon boardview, as they are the same PCB.

Zephyr

Relatively significant motherboard redesign while being cheaper to produce and supported HDMI. It first appeared in late 2006. The encoder/analog IC (Ana) and clock generator from the Xenon were integrated in a new HANA chip. The Zephyr B/C also feature CPUs with newer stepping and die shrunken 80nm Y2 and Rhea GPUs. The Zephyr_B's Y2 GPU still had a 90nm eDRAM, whereas the Zephyr_C's Rhea GPU shrunk the eDRAM to 80nm. The Zephyr_B first appeared in early 2007, but the Zephyr_C shortly followed around mid-2007.

Images

Zephyr_C

Xbox 360 Zephyr Top.png Xbox 360 Zephyr Bottom.png


Schematics

Zephyr_A

Boardview

Zephyr_A (90nm Y1 GPU)

Zephyr_B/C (80nm Y2 or Rhea GPU)

Falcon

First motherboard to feature a 65nm Loki CPU while being slightly further simplified, like having a cheaper power delivery system (CPU Core voltage is two phases instead of three, for example). It first appeared in late 2007 consoles. Mid-2008 and later Falcons also came with reliable Rhea GPUs and 4x128MB RAM configurations instead of the previous 8x64MB.

Images

Xbox 360 Falcon Top.png Xbox 360 Falcon Bottom.png

Schematics

Boardview

Jasper

First motherboard to shink the GPU to the 65nm Zeus, matching with the CPU. It was first seen in late 2008 consoles. It came with an updated south bridge that supported "big block" 256 MB and 512 MB NAND flash chips and those bigger flash chips were featured in the "Xbox 360 Arcade" retail configurations. Some Jasper motherboards produced in July 2009 also came with Kronos GPUs, which shrunk the eDRAM to also be 65nm. Most of these motherboards are known to be reliable, but some may come with leaky 16v 1500 µF Sanyo capacitors.

Images

Xbox 360 Jasper V1 Top.png Xbox 360 Jasper V1 Bottom.png

Schematics

Includes "Panda" integrated memory unit, using an additional NAND + USB interface as opposed to the final Jasper solution combined with main NAND.

Boardview

Tonasket

Also known as "Jasper Kronos" or by the GPU name, "Kronos". It was first spotted in late 2009 consoles. It is a minor PCB revision of the Jasper, but all of the GPUs on this board are the Kronos revision with a 65nm eDRAM. All versions of this motherboard are also known to be reliable.

Images

Xbox 360 Jasper v2 (Kronos) Top.png Xbox 360 Jasper v2 (Kronos) Bottom.png

Schematics

Boardview

Trinity

Significant motherboard redesign used for the launch models of the Xbox 360 S. It combines the CPU and GPU into one 45nm chip codenamed "Valhalla". The eDRAM is still 65nm. It has the same flash config as the Jasper & Tonasket and is generally quite reliable like the Jasper and Tonasket. Some consoles came with an internal 4 GB Memory Unit add-on.

Images

Retail

Xbox 360 Trinity Top.png Xbox 360 Trinity Bottom.png

Unpopulated

Xbox 360 Trinity Top (Unpopulated).png Xbox 360 Trinity Bottom (Unpopulated).png

Schematics

Boardview

Corona

Also known as "Corona V1 (16MB)" or "Corona V2 (4 GB)"

First appeared in mid-2011 S consoles. It has similarities to Trinity, but slightly simplified and with a new south bridge that can support on-board 4 GB NANDs. The new south bridge also integrated the ethernet PHY and HANA IC into it. It is also reliable, aside from the 4 GB flash chips.

Images

Corona 4 GB

Xbox 360 Corona with POST-OUT Top.pngXbox 360 Corona with POST-OUT Bottom.png

Schematics

Corona PCB

Translation

Boardview

Waitsburg

Also known as "Corona V3 (16MB)" or "Corona V4 (4 GB)"

First appeared in early 2012 S consoles. POST trace has been removed. It's otherwise essentially the same as the Corona.

Images

Waitsburg 16 MB

JFT-XBOX360S-Waitsburg-Top-20240121.pngJFT-XBOX360S-Waitsburg-Bottom-20240121.png

Schematics

Boardview

Stingray

Also known as "Corona V5 (16MB)" or "Corona V6 (4 GB)"

Launch model Xbox 360 E motherboard. Very similar to Waitsburg but with a new power supply connector and less rear I/O.

Images

Stingray 4 GB

Xbox 360 Corona Stingray Top.png Xbox 360 Corona Stingray Bottom.png

Schematics

Boardview

Winchester

Revised XCGPU and a vastly more simplified layout. The updated XCGPU integrated the eDRAM into the main die and patched the Reset Glitch Hack by disabling many of the pins used for that exploit. This motherboard first appeared in Xbox 360 Es in late 2014.

Images

Winchester 4 GB

Xbox 360 Winchester Top.png Xbox 360 Winchester Bottom.png

Exclamation-circle-fill.svgNo schematics or boardviews are currently available for this motherboard.


Schematic Notes

USB lines

Gameport
Front USB
Memport
Front USB (Memory Unit)
Expport
Rear USB (incl. Kinect)
Waveport
Xbox 360 S/E Wi-Fi card
MUport
Internal USB (Memory Unit for Trinity)
Argon
Front panel for original models
Boron
Front panel for Xbox 360 S models