Genesis:RGB Bypass Color Fix: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

16 April 2024

3 April 2023

  • curprev 01:3201:32, 3 April 2023Derf talk contribs 534 bytes +534 Created page with "As [https://www.retrorgb.com/fix-for-all-rgb-bypassed-sega-genesis.html documented here by Tianfeng], colors will be slightly incorrect if you used a regular bypass board that doesn't fully replicate the original circuit when you lift the RGB pins. To fix this, add a 5.6k resistor (three total) from the R, G, and B pads on the board to a 5V pad on the motherboard. Below is a before and after picture of the color steps in 240p Test Suite. File:3BP Color Fix Before.png|..."