Xbox 360:JTAG/AUD CLAMP: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

4 September 2024

30 August 2024

11 March 2024

  • curprev 19:2419:24, 11 March 2024‎ Nadaman talk contribs‎ 2,153 bytes +2,153‎ Created page with "This is the traditional JTAG and R-JTOP wiring for Zephyr, Falcon/Opus, and Jasper motherboards. This method may disable 5.1 audio output. ==Equipment Needed== *A soldering iron, solder, and flux *Isopropyl alcohol (90% or higher recommended) and cotton swabs *28AWG or 30AWG wire *Two 1N914/4148 switching diodes *Heat shrink tubing ==Motherboard Soldering== Solder the wires to the points as shown in the image. Make sure to properly mount the diodes with the correct polar..." Tag: Visual edit
Retrieved from "https://consolemods.org/wiki/Xbox_360:JTAG/AUD_CLAMP"