Xbox 360:Exploit Chart: Difference between revisions
m (Fixed some formating with superscripts/footnotes) |
(Update for RGH3) |
||
| Line 23: | Line 23: | ||
| N/A | | N/A | ||
|- | |- | ||
| | | ≤14699 | ||
| RGH1.2<sup> | | RGH1.2<sup>3</sup> | ||
| RGH1 | |||
| RGH1 | |||
| RGH1 | |||
| RGH3<sup>4, 5</sup> | |||
| RGH3<sup>4, 5</sup> | |||
| N/A | |||
|- | |||
| >14699<sup>4</sup> | |||
| RGH1.2<sup>3</sup> | |||
| RGH2 | | RGH2 | ||
| RGH1.2 | | RGH1.2 | ||
| RGH1.2 | | RGH1.2 | ||
| | | RGH3<sup>5</sup> | ||
| | | RGH3<sup>5</sup> | ||
| N/A | | N/A | ||
|} | |} | ||
| Line 37: | Line 46: | ||
<sup>2</sup> Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB. | <sup>2</sup> Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB. | ||
<sup>3</sup> | <sup>3</sup> Only works on some boards and can take minutes to boot - some randomly crash on PLL de-assertion. However, this is the best RGH option for Xenon. | ||
<sup>4</sup> | <sup>4</sup> Update to latest dashboard prior to RGH. | ||
<sup>5</sup> Requires scraping solder mask off of point (more difficult). | |||
| Line 100: | Line 110: | ||
| [[#reliable|✔️]] | | [[#reliable|✔️]] | ||
| [[#reliable|✔️]] | | [[#reliable|✔️]] | ||
| [[#impossible|❌]] | |||
|- | |||
| RGH3 | |||
| [[#impossible|❌]] | |||
| [[#impossible|❌]] | |||
| [[#reliable|✔️]] | |||
| [[#reliable|✔️]] | |||
| [[#reliable|✔️7]] | |||
| [[#reliable|✔️7]] | |||
| [[#impossible|❌]] | | [[#impossible|❌]] | ||
|- | |- | ||
Revision as of 17:27, 12 June 2022
Recommended Exploit Chart
The below chart highlights the recommended hack to use on each console.
| Dashboard | Xenon | Zephyr | Falcon1 | Jasper | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|
| ≤73712 | JTAG | JTAG | JTAG | JTAG | N/A | N/A | N/A |
| ≤14699 | RGH1.23 | RGH1 | RGH1 | RGH1 | RGH34, 5 | RGH34, 5 | N/A |
| >146994 | RGH1.23 | RGH2 | RGH1.2 | RGH1.2 | RGH35 | RGH35 | N/A |
1 Opus motherboards are Falcon motherboards without HDMI
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB.
3 Only works on some boards and can take minutes to boot - some randomly crash on PLL de-assertion. However, this is the best RGH option for Xenon.
4 Update to latest dashboard prior to RGH.
5 Requires scraping solder mask off of point (more difficult).
Full Exploit Compatibility Chart
The below chart shows all compatible hacks for each console.
| Exploit | Xenon | Zephyr | Falcon1 | Jasper | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|
| JTAG | ✔️2 | ✔️2 | ✔️2 | ✔️2 | ❌ | ❌ | ❌ |
| RGH1 | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
| RGH1.2 | ➖3 | ➖3 | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌ |
| RGH2 | ❌5 | ✔️ | ✔️ | ✔️ | ✔️ | ✔️ | ❌ |
| S-RGH | ❌4 | ➖4 | ➖4 | ➖6 | ✔️ | ✔️ | ❌ |
| RGH3 | ❌ | ❌ | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌ |
| R-JTAG | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
| R-JTOP | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
1 Opus motherboards are Falcon motherboards without HDMI
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.
3 Only works on some boards and can take minutes to boot - some randomly crash on PLL de-assertion.
4 Hangs for unknown reason.
5 RGH2 requires HANA chip, which is not present on Xenon.
6 Only works on some boards.
7 Requires scraping solder mask off of point (more difficult).
| Legend |
|---|
| Reliable ✔️ |
| Unreliable ➖ |
| Impossible ❌ |