AV:COMP2DVI

Mitch1256

The Comp Cleaner is not a scaler!!!  It simply routes the analog signal to the analog pins on the DVI connector!!!  Visualize it exactly as if it was a Comp-to-Comp device, just with a different connector on the output side for interfacing with capture cards and displays' analog inputs. 

The Comp Cleaner is an open-source (CERN OHLv2) device, designed filter 240p - 1080i YPbPr component video signals for use with digital devices, such as flat-screen TV's and capture cards. This will allow more flexibility to your setup, depending on your target capture card or device.

This device has been tested and seems to work well at all resolutions.  The gerbers, as well as the Eagle design files can be downloaded here:

https://github.com/retrorgb/COMP2DVI/releases/tag/2.1 https://github.com/retrorgb/COMP2DVI/blob/master/COMP2DVI\_BOM.xlsx

DIP Switch Settings

The settings are printed on the back of the PCB, but can be referenced here (click for full-size):

DVI-I Cable / Connector

This can connect to your capture card via a DVI-I cable or coupler.  Make _sure_ whatever your connection is using has the analog pins, otherwise it won't work!

DVI-I Cables: https://amzn.to/2Ndxglu https://amzn.to/2T2QuQb

DVI-I Coupler: https://ebay.to/2DUk9BD https://www.mycablemart.com/store/cart.php?m=product\_detail&p=5987

Full Bill Of Materials

https://github.com/retrorgb/COMP2DVI/blob/master/COMP2DVI\_BOM.xlsx