Xbox 360:Exploit Chart: Difference between revisions
Line 146: | Line 146: | ||
| TBD | | TBD | ||
| TBD | | TBD | ||
| | | [[#impossible|❌]] | ||
|} | |} | ||
Revision as of 20:18, 18 September 2022
Recommended Exploit Chart
The below chart highlights the recommended hack to use on each console.
Dashboard | Xenon | Zephyr | Falcon1 | Jasper | Trinity | Corona | Winchester |
---|---|---|---|---|---|---|---|
≤73712 | JTAG | JTAG | JTAG | JTAG | N/A | N/A | N/A |
≤14699 | EXT_CLK3 | EXT_CLK | RGH1 | RGH1 | RGH34, 5 | RGH34, 5 | N/A |
>146994 | EXT_CLK3 | EXT_CLK | RGH1.2 | RGH1.2 | RGH35 | RGH35 | N/A |
1 Opus motherboards are Falcon motherboards without HDMI
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB.
3 RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.
4 Update to latest dashboard prior to RGH.
5 Requires scraping solder mask off of point (more difficult).
Full Exploit Compatibility Chart
The below chart shows all compatible hacks for each console.
Exploit | Xenon | Zephyr | Falcon1 | Jasper | Trinity | Corona | Winchester |
---|---|---|---|---|---|---|---|
JTAG | ✔️2 | ✔️2 | ✔️2 | ✔️2 | ❌ | ❌ | ❌ |
RGH1 | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
RGH1.2 | ➖3 | ➖3 | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌ |
RGH2 | ❌5 | ➖6 | ➖6 | ➖6 | ✔️ | ✔️ | ❌ |
S-RGH | ❌5 | ➖4 | ➖4 | ➖6 | ✔️ | ✔️ | ❌ |
RGH3 | ❌ | ❌ | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌ |
R-JTAG+ | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
R-JTOP | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
EXT_CLK | ✔️ | ✔️ | TBD | TBD | TBD | TBD | ❌ |
1 Opus motherboards are Falcon motherboards without HDMI
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.
3 Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion.
4 Hangs for unknown reason.
5 RGH2 requires HANA chip, which is not present on Xenon.
6 Unreliable due to requirement of long wires.
7 Requires scraping solder mask off of point (more difficult).
Legend |
---|
Reliable ✔️ |
Unreliable ➖ |
Impossible ❌ |