GameCube:Connector Pinouts: Difference between revisions

Latest revision as of 23:15, 19 February 2023

Pin #	Color	J1	Function
1	Yellow	2	5V Power Supply (used by rumble motor)
2	Red	3	DATA line: bi-directional data to/from console, pull up to 3.43V
3	Green	4	Ground
4	White	5	Ground (Extrme Skillz GC to USB interface has pins 3+4 wired as common ground)
5	-	-	Unknown
6	Blue	1	3.43V logic supply
7	Black	6	Cable shielding / ground. Usually the same ground of pin 3.

@@ Line 1: / Line 1: @@
+[[Category:Pinouts]]
 == GameCube Controller Connector Pinout ==
-[[File:GameCube_Controller_Pinout.svg|right|Link=|x300px]]
+[[File:GameCube_Controller_Pinout.svg|thumb]]
 {| class="wikitable"
 |-
@@ Line 19: / Line 20: @@
 | 7 || Black || 6 || Cable shielding / ground. Usually the same ground of pin 3.
 |}
 == GameCube AV Connector Pinout ==
-<small>'''Note:''' ''Female'' is connector at the video cable. ''Male'' is connector at the console.</small>
+''Main article:[[Nintendo Multi Out]]''
-[[File:Nintendo_AV_Male.svg|right|Link=|x300px]]
-[[File:Nintendo_AV_Female.svg|right|Link=|x300px]]
-{| class="wikitable"
-|-
-! Pin # !! Name !! Description
-|-
-| 1 || R || R
-|-
-| 2 || G || G
-|-
-| 3 || C-Sync || Composite Sync
-<small>''Replaced by +12V on PAL SNES and PAL Gamecube consoles But not the PAL N64''</small>
-|-
-| 4 || B || B
-|-
-| 5 || GND || Ground
-|-
-| 6 || GND || Ground
-|-
-| 7 || Y || S-Video Y (Luminance)
-|-
-| 8 || C || S-Video C (Chrominance)
-|-
-| 9 || CVBS || Composite Video
-|-
-| 10 || +5V || +5 VDC
-|-
-| 11 || L+R || Left+Right Audio (Mono)
-|-
-| 12 || L-R || Left-Right Audio (Used to calculate Stereo)
-|}
-[[File:Nintendo_AV_Male_full.svg|right|Link=|x200px]]