SNES:Video Cables: Difference between revisions
(Created page with "{{Warning|Never use use an NTSC cable in a PAL system!}} == SNES / SFC == All original (large) versions of the Super Nintendo and Super Famicom (NTSC & PAL) can output RGB without a modification, however each region requires a different cable. The SNES Mini / Famicom Jr. require a modification before an RGB/YPbPr/HDMI cable can be used (see the SNES Jr page for more info). === RGB === * [https://www.retrogamingcables.co.uk/SUPER-NINTENDO-SUPER-FA...") |
|||
| Line 1: | Line 1: | ||
{{Warning|Never use use an NTSC cable in a PAL system!}} | {{Warning|Never use use an NTSC cable in a PAL system!}} | ||
== | == NTSC Super Nintendo / Super Famicom == | ||
All original (large) versions of the Super Nintendo and | All original (large) versions of the NTSC Super Nintendo and both NTSC & PAL Super Famicom can output RGB without a modification, however each region requires a different cable. The SNES Mini / Famicom Jr. require a modification before an RGB/YPbPr/HDMI cable can be used (see [[SNES:SNES_Jr_Mods|the SNES Jr page]] for more info). | ||
=== RGB === | === RGB === | ||
Revision as of 14:39, 14 July 2023
 | Never use use an NTSC cable in a PAL system! |
NTSC Super Nintendo / Super Famicom
All original (large) versions of the NTSC Super Nintendo and both NTSC & PAL Super Famicom can output RGB without a modification, however each region requires a different cable. The SNES Mini / Famicom Jr. require a modification before an RGB/YPbPr/HDMI cable can be used (see the SNES Jr page for more info).
RGB
Component YPbPr
HDMI
While the SNES does not output HDMI natively, you can use a cable that converts the RGB output to HDMI.
- RAD2x HDMI Cable (upscales to 480p)
SCART (RGB)
All systems (large, original version) can all output CSYNC without a modification, except the very rare 1CHIP-03. If you have a 1CHIP-03, either use luma as sync, or see the instructions below to connect CSYNC:
- Super Nintendo SNES RGB SCART cable (NTSC) (UK Seller)
- Super Nintendo SNES RGB SCART cable (NTSC) (US Seller #1)
- Super Nintendo SNES RGB SCART cable (NTSC) (US Seller #2)
PAL Super Nintendo
These systems output 12v on the csync pin and if you tried to use an NTSC / csync cable on a PAL system, you could damage your equipment! Also, PAL cables require different components to send the proper signals to PAL displays, so you should never use an NTSC cable on a PAL system (or vice versa).
In most scenarios, the best RGB cables to use with PAL SNES systems are either the basic-shielded cables that get sync from the luma pin, or fully shielded that get sync from cvbs (composite video).
An easier choice is the universal cable linked above:
- Super Nintendo SNES RGB SCART cable (PAL) (UK Seller)
- Super Nintendo SNES RGB SCART cable (PAL) (US Seller)
If your display, processor or switch requires [sync.html csync], you'll either need to use the universal cable, or make sure a sync stripper is in your setup chain. Once again, please make sure to never use use an NTSC cable in a PAL system!