Xbox 360:Exploit Chart: Difference between revisions
(RGH 1.2 is a better than RGH 1; also added links on the recommended exploit table. Glitch2 exploits like RGH1.2 can still be used if below 14699.) |
|||
| Line 8: | Line 8: | ||
! Xenon | ! Xenon | ||
! Zephyr | ! Zephyr | ||
! Falcon<sup>1</sup> | ! Falcon/Opus<sup>1</sup> | ||
! Jasper | ! Jasper | ||
! Trinity | ! Trinity | ||
| Line 15: | Line 15: | ||
|- | |- | ||
| ≤7371<sup>2</sup> | | ≤7371<sup>2</sup> | ||
| JTAG | | [[Xbox 360:JTAG|JTAG]] | ||
| JTAG | | [[Xbox 360:JTAG|JTAG]] | ||
| JTAG | | [[Xbox 360:JTAG|JTAG]] | ||
| JTAG | | [[Xbox 360:JTAG|JTAG]] | ||
| N/A | | N/A | ||
| N/A | | N/A | ||
| N/A | | N/A | ||
|- | |- | ||
| | | >7371 | ||
| EXT_CLK<sup>3</sup> | | [[Xbox 360:RGH|EXT_CLK<sup>3</sup>]] | ||
| | | [[Xbox 360:RGH|EXT_CLK]] | ||
| [[Xbox 360:RGH|RGH1.2]] | |||
| [[Xbox 360:RGH|RGH1.2]] | |||
| [[Xbox 360:RGH|RGH3]]<sup>4</sup> | |||
| [[Xbox 360:RGH|RGH3]]<sup>4</sup> | |||
| EXT_CLK | |||
| | |||
| RGH1.2 | |||
| RGH1.2 | |||
| RGH3<sup>4</sup> | |||
| RGH3<sup>4</sup> | |||
| N/A | | N/A | ||
|} | |} | ||
| Line 44: | Line 35: | ||
<sup>1</sup> Opus motherboards are Falcon motherboards without HDMI. | <sup>1</sup> Opus motherboards are Falcon motherboards without HDMI. | ||
<sup>2</sup> Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB. | <sup>2</sup> [[Xbox 360:Standard NAND#(Phat Only) Checking your CB if it's JTAGable|Must check CB via NAND dump]] to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB. | ||
<sup>3</sup> RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons. | <sup>3</sup> RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons. | ||
| Line 59: | Line 50: | ||
! Xenon | ! Xenon | ||
! Zephyr | ! Zephyr | ||
! Falcon | ! Falcon/Opus | ||
! Jasper | ! Jasper | ||
! Trinity | ! Trinity | ||
| Line 151: | Line 142: | ||
<sup>2</sup> Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB. | <sup>2</sup> Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB. | ||
<sup>3</sup> Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion. | <sup>3</sup> Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion. R-JTAG requires dashboard 14 | ||
<sup>4</sup> Hangs for unknown reason. | <sup>4</sup> Hangs for unknown reason. | ||
| Line 161: | Line 152: | ||
<sup>7</sup> Requires scraping solder mask off of point (more difficult). | <sup>7</sup> Requires scraping solder mask off of point (more difficult). | ||
<sup>8</sup> | <sup>8</sup> Only works on some boards and can inconsistant boot times if at all. Sometimes it can work perfectly with an instant boot time but could stop glitching after a period of days, weeks, or months. | ||
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 15:34, 29 August 2023
Recommended Exploit Chart
The below chart highlights the recommended hack to use on each console.
| Dashboard | Xenon | Zephyr | Falcon/Opus1 | Jasper | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|
| ≤73712 | JTAG | JTAG | JTAG | JTAG | N/A | N/A | N/A |
| >7371 | EXT_CLK3 | EXT_CLK | RGH1.2 | RGH1.2 | RGH34 | RGH34 | N/A |
1 Opus motherboards are Falcon motherboards without HDMI.
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB.
3 RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.
4 Requires scraping solder mask off of point (more difficult).
Full Exploit Compatibility Chart
The below chart shows all compatible hacks for each console.
| Exploit | Xenon | Zephyr | Falcon/Opus | Jasper | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|
| JTAG | ✔️2 | ✔️2 | ✔️2 | ✔️2 | ❌ | ❌ | ❌1 |
| RGH1 | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
| RGH1.2 | ➖3 | ➖3 | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌1 |
| RGH2 | ❌5 | ➖6 | ➖6 | ➖6 | ✔️ | ✔️ | ❌1 |
| S-RGH | ❌5 | ➖4 | ➖4 | ➖6 | ✔️ | ✔️ | ❌1 |
| RGH3 | ❌ | ❌ | ➖8 | ➖8 | ✔️7 | ✔️7 | ❌1 |
| EXT_CLK | ✔️ | ✔️ | TBD | TBD | TBD | TBD | ❌1 |
| R-JTAG+ | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
| R-JTOP | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
1 Winchester consoles cannot be RGH'd or JTAG'd
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.
3 Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion. R-JTAG requires dashboard 14
4 Hangs for unknown reason.
5 RGH2 requires HANA chip, which is not present on Xenon.
6 Unreliable due to requirement of long wires.
7 Requires scraping solder mask off of point (more difficult).
8 Only works on some boards and can inconsistant boot times if at all. Sometimes it can work perfectly with an instant boot time but could stop glitching after a period of days, weeks, or months.
| Legend |
|---|
| Reliable ✔️ |
| Unreliable ➖ |
| Impossible ❌ |