Xbox 360:Exploit Chart: Difference between revisions
(RGH 1.2 is a better than RGH 1; also added links on the recommended exploit table. Glitch2 exploits like RGH1.2 can still be used if below 14699.) |
|||
| Line 152: | Line 152: | ||
<sup>7</sup> Requires scraping solder mask off of point (more difficult). | <sup>7</sup> Requires scraping solder mask off of point (more difficult). | ||
<sup>8</sup> Only works on some boards and | <sup>8</sup> Only works on some boards and often has inconsistant boot times if it boots at all. Sometimes it can work perfectly with an instant boot time but could stop glitching after a period of days, weeks, or months. | ||
{| class="wikitable" | {| class="wikitable" | ||
Revision as of 19:18, 31 August 2023
Recommended Exploit Chart
The below chart highlights the recommended hack to use on each console.
| Dashboard | Xenon | Zephyr | Falcon/Opus1 | Jasper | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|
| ≤73712 | JTAG | JTAG | JTAG | JTAG | N/A | N/A | N/A |
| >7371 | EXT_CLK3 | EXT_CLK | RGH1.2 | RGH1.2 | RGH34 | RGH34 | N/A |
1 Opus motherboards are Falcon motherboards without HDMI.
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB.
3 RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.
4 Requires scraping solder mask off of point (more difficult).
Full Exploit Compatibility Chart
The below chart shows all compatible hacks for each console.
| Exploit | Xenon | Zephyr | Falcon/Opus | Jasper | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|
| JTAG | ✔️2 | ✔️2 | ✔️2 | ✔️2 | ❌ | ❌ | ❌1 |
| RGH1 | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
| RGH1.2 | ➖3 | ➖3 | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌1 |
| RGH2 | ❌5 | ➖6 | ➖6 | ➖6 | ✔️ | ✔️ | ❌1 |
| S-RGH | ❌5 | ➖4 | ➖4 | ➖6 | ✔️ | ✔️ | ❌1 |
| RGH3 | ❌ | ❌ | ➖8 | ➖8 | ✔️7 | ✔️7 | ❌1 |
| EXT_CLK | ✔️ | ✔️ | TBD | TBD | TBD | TBD | ❌1 |
| R-JTAG+ | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
| R-JTOP | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
1 Winchester consoles cannot be RGH'd or JTAG'd
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.
3 Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion. R-JTAG requires dashboard 14
4 Hangs for unknown reason.
5 RGH2 requires HANA chip, which is not present on Xenon.
6 Unreliable due to requirement of long wires.
7 Requires scraping solder mask off of point (more difficult).
8 Only works on some boards and often has inconsistant boot times if it boots at all. Sometimes it can work perfectly with an instant boot time but could stop glitching after a period of days, weeks, or months.
| Legend |
|---|
| Reliable ✔️ |
| Unreliable ➖ |
| Impossible ❌ |