Xbox 360:RGH/Solder Points: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 6: | Line 6: | ||
** [[File:Y5p0dxP.jpg|331x331px]] | ** [[File:Y5p0dxP.jpg|331x331px]] | ||
=== 1.8V '''(Only if using an X360 ACE)''' === | === 1.8V '''(Only if using an X360 ACE V1/V2/V3)''' === | ||
* '''Non-Xenon''' | * '''Non-Xenon''' | ||
| Line 91: | Line 91: | ||
J2C3 | J2C3 | ||
'''[[File:Trinity 3v3GND.png|frameless|350x350px]]''' | |||
==Slim or E (Corona/Waitsburg/Stingray)== | ==Slim or E (Corona/Waitsburg/Stingray)== | ||
Revision as of 00:12, 5 September 2023
Phat
3.3v
- J2B1
1.8V (Only if using an X360 ACE V1/V2/V3)
- Non-Xenon
- Xenon
PLL
- Bottom
- Top (under CPU heatsink; requires scraping)
STBY_CLK
- Top (Xenon)
- Top (Non-Xenon)
- There are 2 points boxed; either can be used.
- Bottom (Non-Xenon)
POST
- Bottom
- Top (requires scraping)
CPU_RST
- R8C2
- C7R112
- J8C1
GND
- J2B1 Header
- AV Port
- Any other ground point
Slim (Trinity)
PLL
- No alternative point!
CPU_CLK (Only if using an X360 ACE V4/V5)
Top
- There are two points circled for C1 and C2 respectively; either can be used or bridged.
Bottom
POST & RST
- There are two RST points, either can be used.
- A Postfix adapter can be used on Trinity in case the POST point is damaged.
STBY_CLK
C3B10 (Top)
FT3N2 (Bottom)
GND & 3.3V
J2C3
Slim or E (Corona/Waitsburg/Stingray)
File:5lY3TID.png
Postfix adapter installation guide
PLL
- No alternative point!
CPU_CLK (Only if using an X360 ACE V4/V5)
- There are two points circled for C1 and C2 respectively, either can be used or bridged.
POST & RST
- There are two RST points; either can be used.
- If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.
GND & 3.3V
J2C3
