PS4:Upgrading your Hard Drive: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(Reword the firmware installation steps and change the disassembly instructions)
(Rewrite the entire page)
Line 1: Line 1:


Note that if you intend to migrate your game saves and installed content your replacement HDD must be larger than or equal to the size of the original HDD; and you will need an external HDD/USB storage device of larger or equal size tom transfer the backup data.
== Prerequisites ==
To upgrade/replace the HDD you will need:
# An external USB hard drive or flash drive at least 2GB in size, or large enough to store a backup of all your game saves/applications, if you want to keep them.
# A PS4 recovery firmware that matches the same version already installed, or newer. (You can get the latest  [https://www.playstation.com/en-us/support/hardware/ps4/system-software/ from playstation.com])
# A computer that can connect to the USB drive
# A Phillips #1 screwdriver
# A 2.5" (laptop size) HDD or SSD large enough to store any content you are migrating from the old drive.


# Format the external drive as FAT32 or exFAT
== Backing up game saves and applications (Optional) ==
# On the PS4, navigate to Settings → System → Backup and Restore → Backup. The process may take hours to complete depending on your selections.
# Format the USB drive as FAT32 or exFAT
# Shut down the PS4 and unplug it.
# Connect the USB drive to the PS4
# Swap out the hard drives with the following steps:
# On the PS4, navigate to Settings → System → Backup and Restore → Backup
#* Unplug all cables from the PS4.
# Choose what content you would like to back up. The process may take hours to complete depending on your selections
#* Slide the glossy cover until it pops and you can remove it.
# Unplug the USB drive from the PS4
#* Unscrew the screw with the PS4 button symbols on it next to the HDD.
 
#* Slide the HDD caddy out of the system.
== Replacing the Hard Drive ==
#* Unscrew the screws holding the hard drive into the caddy.
=== Original PS4 (CUH-1200, CUH-1110 & CUH-1000 series) ===
#* Slide the hard drive out of the caddie.
# Shut down the PS4 and unplug it
#* Insert the new HDD in the caddie in the same orientation as the old drive.
# Unplug all cables from the PS4
#* Install the 4 screws that hold the HDD to the caddy.
# Slide the glossy cover to the side of the console until it pops and you can remove it
#* Insert the HDD caddie into the console.
# Unscrew the HDD retention screw (the screw with PS symbols on it next to the HDD)
#* Install the HDD retention screw.
# Slide the HDD caddy out of the system
#* Reassemble the console.
# Unscrew the four screws holding the hard drive into the caddy
# Plug the cables back in and start the PS4. It will ask for a firmware file of the firmware it had installed or newer.
# Slide the hard drive out of the caddie
# Download your recovery firmware of choice (or the latest [https://www.playstation.com/en-us/support/hardware/ps4/system-software/ from playstation.com])
# Insert the new HDD in the caddie in the same orientation as the old drive
# Install the four screws that hold the HDD to the caddy
# Insert the HDD caddie into the console
# Install the HDD retention screw
# Reassemble the console and reconnect the cables
 
=== Slim PS4 (CUH-2015 series) ===
<TODO>
 
=== PS4 Pro (CUH-7000 series) ===
<TODO>
 
== Installing system firmware ==
# Plug the cables back in and start the PS4. The console will fail to start up and will ask for a firmware file to install
# Download your recovery firmware of choice or the latest [https://www.playstation.com/en-us/support/hardware/ps4/system-software/ from playstation.com]
# If you didn't format the USB drive in a previous step format the USB drive as FAT32 or exFAT
# Create a folder in the root of the USB drive called <code>PS4</code>. Inside that folder create another folder called <code>UPDATE</code> and place the recovery firmware file there named <code>PS4UPDATE.PUP</code> The final path should be <code><drive root>\PS4\UPDATE\PS4UPDATE.PUP</code>
# Create a folder in the root of the USB drive called <code>PS4</code>. Inside that folder create another folder called <code>UPDATE</code> and place the recovery firmware file there named <code>PS4UPDATE.PUP</code> The final path should be <code><drive root>\PS4\UPDATE\PS4UPDATE.PUP</code>
# Plug it into your PS4 and follow the onscreen instructions to install it.
# Plug the USB drive into your PS4 and follow the onscreen instructions to install it
#* This will format the new hard drive automatically; it may take some time.
#* This will format the new hard drive automatically; it may take some time
# Follow the onscreen instructions to set up the system.
# Follow the onscreen instructions to set up the system
# With the external hard drive plugged in, navigate to Settings → System → Backup and Restore → Restore, and select the backup you had made previously. This process may take hours to complete. Your system should now be back to the way it had started, but with more hard drive space.
 
== Restoring game saves and applications (Optional) ==
# Connect the USB drive that you used during the backup process
# On the PS4 navigate to Settings → System → Backup and Restore → Restore, and select the backup you had made previously. This process may take hours to complete. Your system will be erased and the restore process will begin.
# Once complete your profile and any content you chose to back up will be restored.


[[Category:PS4]]
[[Category:PS4]]

Revision as of 07:11, 27 November 2023

Prerequisites

To upgrade/replace the HDD you will need:

  1. An external USB hard drive or flash drive at least 2GB in size, or large enough to store a backup of all your game saves/applications, if you want to keep them.
  2. A PS4 recovery firmware that matches the same version already installed, or newer. (You can get the latest from playstation.com)
  3. A computer that can connect to the USB drive
  4. A Phillips #1 screwdriver
  5. A 2.5" (laptop size) HDD or SSD large enough to store any content you are migrating from the old drive.

Backing up game saves and applications (Optional)

  1. Format the USB drive as FAT32 or exFAT
  2. Connect the USB drive to the PS4
  3. On the PS4, navigate to Settings → System → Backup and Restore → Backup
  4. Choose what content you would like to back up. The process may take hours to complete depending on your selections
  5. Unplug the USB drive from the PS4

Replacing the Hard Drive

Original PS4 (CUH-1200, CUH-1110 & CUH-1000 series)

  1. Shut down the PS4 and unplug it
  2. Unplug all cables from the PS4
  3. Slide the glossy cover to the side of the console until it pops and you can remove it
  4. Unscrew the HDD retention screw (the screw with PS symbols on it next to the HDD)
  5. Slide the HDD caddy out of the system
  6. Unscrew the four screws holding the hard drive into the caddy
  7. Slide the hard drive out of the caddie
  8. Insert the new HDD in the caddie in the same orientation as the old drive
  9. Install the four screws that hold the HDD to the caddy
  10. Insert the HDD caddie into the console
  11. Install the HDD retention screw
  12. Reassemble the console and reconnect the cables

Slim PS4 (CUH-2015 series)

<TODO>

PS4 Pro (CUH-7000 series)

<TODO>

Installing system firmware

  1. Plug the cables back in and start the PS4. The console will fail to start up and will ask for a firmware file to install
  2. Download your recovery firmware of choice or the latest from playstation.com
  3. If you didn't format the USB drive in a previous step format the USB drive as FAT32 or exFAT
  4. Create a folder in the root of the USB drive called PS4. Inside that folder create another folder called UPDATE and place the recovery firmware file there named PS4UPDATE.PUP The final path should be <drive root>\PS4\UPDATE\PS4UPDATE.PUP
  5. Plug the USB drive into your PS4 and follow the onscreen instructions to install it
    • This will format the new hard drive automatically; it may take some time
  6. Follow the onscreen instructions to set up the system

Restoring game saves and applications (Optional)

  1. Connect the USB drive that you used during the backup process
  2. On the PS4 navigate to Settings → System → Backup and Restore → Restore, and select the backup you had made previously. This process may take hours to complete. Your system will be erased and the restore process will begin.
  3. Once complete your profile and any content you chose to back up will be restored.