Xbox 360:Exploit Chart: Difference between revisions
| Line 45: | Line 45: | ||
The below chart shows ''all compatible hacks'' for each console. | The below chart shows ''all compatible hacks'' for each console. | ||
{| class="colortable sortable" style="text-align:center;" | {| class="wikitable colortable sortable" style="text-align:center;" | ||
|- style="font-weight:bold;" | |- style="font-weight:bold;" | ||
!Exploit | !Exploit | ||
Revision as of 20:45, 14 February 2024
Recommended Exploit Chart
The below chart highlights the recommended hack to use on each console.
| Dashboard | Xenon | Zephyr | Falcon/Opus1 | Jasper | Tonasket5 | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|---|
| ≤73712 | JTAG | JTAG | JTAG | JTAG | N/A | N/A | N/A | N/A |
| >7371 | EXT_CLK3 | EXT_CLK | RGH1.2 | RGH1.2 | RGH1.2 | RGH1.24 or RGH34 | RGH1.24 or RGH34 | N/A |
2 Must check CB via NAND dump to see if it is JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB. This mainly effects Jasper systems, as some were manufactured with a patched CB when brand new.
3 RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.
4 Requires scraping solder mask off of point (more difficult).
5 Most Tonasket consoles are more commonly known as Jaspers with Kronos GPUs. RGH methods are the same, but are never JTAG exploitable.
Full Exploit Compatibility Chart
The below chart shows all compatible hacks for each console.
| Exploit | Xenon | Zephyr | Falcon/Opus | Jasper | Tonasket | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|---|
| JTAG | ✔️2 | ✔️2 | ✔️2 | ✔️2 | ❌ | ❌ | ❌ | ❌1 |
| RGH1 | ➖3 | ➖3 | ✔️ | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
| RGH1.2 | ➖3 | ➖3 | ✔️ | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌1 |
| RGH2 | ❌5 | ➖6 | ➖6 | ➖6 | ➖6 | ✔️ | ✔️ | ❌1 |
| S-RGH | ❌5 | ➖4 | ➖4 | ➖6 | ➖6 | ✔️ | ✔️ | ❌1 |
| Mufas | ❌ | ❌ | ❌ | ❌ | ❌ | ✔️ | ✔️ | ❌1 |
| EXT_CLK | ✔️ | ✔️ | TBD | TBD | TBD | TBD | TBD | ❌1 |
| RGH3 | ❌ | ❌ | ➖8 | ➖8 | ➖8 | ✔️7 | ✔️7 | ❌1 |
| R-JTAG+ | ➖3 | ➖3 | ✔️ | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
| R-JTOP | ➖3 | ➖3 | ✔️ | ✔️ | ✔️ | ❌ | ❌ | ❌1 |
1 Winchester consoles cannot be RGH'd or JTAG'd
2 Must check CB via NAND dump to see if it is JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.
3 Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion. R-JTAG requires dashboard 14719, and R-JTOP requires dashboard 15572.
4 Hangs for unknown reason.
5 RGH2 and S-RGH requires the HANA chip, which is not present on Xenon.
6 Unreliable due to requirement of long wires.
7 Requires scraping solder mask off of point (more difficult).
8 Only works on some boards and often has inconsistant boot times if it boots at all. Sometimes it can work perfectly with an instant boot time but could stop glitching after a period of days, weeks, or months.
Legend
| Status | Color & Symbol |
|---|---|
| Reliable | ✔️ |
| Unreliable | ➖ |
| Impossible | ❌ |
| To be determined | TBD |