Xbox 360:Alternate Solder Points: Difference between revisions
Jump to navigation
Jump to search
m (→POST & RST) |
m (Kitty cat) |
||
(9 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
[[Category:Xbox360]] | |||
== Phat == | == Phat == | ||
=== 3.3v === | === 3.3v, 5v, GND, and RGH 2 i2C === | ||
* J2B1 | * J2B1 | ||
** [[File: | ** [[File:J2B1.png|482x482px]] | ||
=== 1.8V '''(Only if using an X360 ACE V1/V2/V3)''' === | === 1.8V '''(Only if using an X360 ACE V1/V2/V3)''' === | ||
Line 13: | Line 14: | ||
** [[File:1v8-Xenon.png|frameless]] | ** [[File:1v8-Xenon.png|frameless]] | ||
[[File:Phat360PLLFix.jpg|thumb|400x400px|PLL Repair on a Phat motherboard (required if bottom pad is damaged). Image credit to TheLazyITGuy.]] | [[File:Phat360PLLFix.jpg|thumb|400x400px|PLL Repair on a Phat motherboard (required if bottom pad is damaged). Image credit to TheLazyITGuy.]] | ||
* | === CPU_RST === | ||
** [[File: | * C7R112 | ||
* | ** [[File:RST.png|frameless]] | ||
** [[File: | * R8C2 | ||
** [[File:VXi9LgC.jpg|frameless|311x311px]] | |||
* J8C1 | |||
** '''Will not work with EXT_CLK.''' | |||
** [[File:Cp2OBF3.jpeg|frameless|338x338px]] | |||
=== EXT_CLK === | === EXT_CLK === | ||
* Bottom (Under CPU) | * Bottom (Under CPU) | ||
** [[File:EXT_CLK.png]] | ** [[File:EXT_CLK.png]] | ||
=== FT6U1 POST (RGH 1.2 or EXT_CLK) === | === FT6U1 POST (RGH 1.2 or EXT_CLK) === | ||
* Bottom | * Bottom | ||
** [[File:Post.png|frameless|287x287px]] | ** [[File:Post.png|frameless|287x287px]] | ||
Line 46: | Line 38: | ||
*Bottom | *Bottom | ||
**[[File:WEFEjMr.jpg| | **[[File:WEFEjMr.jpg|300x300px]] | ||
*Top (requires scraping) | *Top (requires scraping) | ||
**[[File:POST_OUT1_Top.jpg| | **[[File:POST_OUT1_Top.jpg|300x300px|(requires scraping)]] | ||
=== GND === | |||
* [[Xbox 360:RGH/Solder Points#3.3v, GND, and RGH 2 i2C|J2B1 Header]] | |||
*AV Port | |||
*'''Any other ground point''' | |||
=== PLL === | |||
* Bottom | |||
** [[File:Fat360PLL.jpg|frameless|290x290px]] | |||
* Top (under CPU heatsink; requires scraping) | |||
** [[File:Fat360topPLL.jpg|frameless|288x288px]] | |||
=== | === STBY_CLK === | ||
* | * Top '''(Xenon)''' | ||
** [[File: | ** [[File:STBY_CLK-Xenon.png]] | ||
* | * Top '''(Non-Xenon)''' | ||
** [[File: | ** [[File:Fat360STBY CLK.jpg|frameless|286x286px]] | ||
* | ** There are 2 points boxed; either can be used. | ||
* | |||
* Bottom '''(Non-Xenon)''' | |||
** [[File:CLK.png|frameless|287x287px]] | |||
=== SMC === | |||
*POST and PLL (Bottom) | |||
**[[File:PhatRGH3SMC.png|frameless|300x300px]] | |||
**Alternative SMC_PLL (Top) | |||
***[[File:Topsidepoint.png|frameless|300x300px]] | |||
== | ==Trinity== | ||
* | === 3.3v, 5v, GND, and RGH 2 i2C === | ||
**[[File: | * J2C3 | ||
** [[File:J2C3Trinity.png|frameless|391x391px]] | |||
===CPU_CLK '''(Only if using an X360 ACE V4/V5)'''=== | === CPU_CLK '''(Only if using an X360 ACE V4/V5)''' === | ||
*Top (HANA) | *Top (HANA) | ||
**[[File:TrinityC1C2.png|frameless|431x431px]] | **[[File:TrinityC1C2.png|frameless|431x431px]] | ||
Line 80: | Line 83: | ||
*Bottom | *Bottom | ||
**[[File:TrinityBottomC1C2.png|frameless| | **[[File:TrinityBottomC1C2.png|frameless|576x576px]] | ||
===PLL=== | |||
*Bottom | |||
**[[File:RGH1.2 Slim PLL.jpg|frameless|497x497px]] | |||
**'''No alternative point!''' | |||
===POST & RST=== | ===POST & RST=== | ||
Line 88: | Line 97: | ||
** There are two RST points, either can be used. | ** There are two RST points, either can be used. | ||
*Top ( | *Top (without postfix adapter) | ||
**[[File:PostfixadapterV1 example.gif|frameless]] | **[[File:CoronaTrinityPOST.png|700x700px]] | ||
*Top (with postfix Adapter) | |||
**[[File:PostfixadapterV1 example.gif|frameless|700x700px]] | |||
** A Postfix adapter can be used on Trinity in case the POST point is damaged. | ** A Postfix adapter can be used on Trinity in case the POST point is damaged. | ||
===STBY_CLK=== | ===STBY_CLK=== | ||
*C3B10 (Top) | *C3B10 (Top) | ||
**[[File:TrinityHanaCLK.jpg|frameless| | **[[File:TrinityHanaCLK.jpg|frameless|700x700px]] | ||
*FT3N2 (Bottom) | *FT3N2 (Bottom) | ||
**[[File:Ft3n2.jpg|frameless| | **[[File:Ft3n2.jpg|frameless|700x700px]] | ||
=== | === SMC === | ||
* | *SMC_PLL is also used for Muffin/Mufas | ||
** | *SMC_PLL | ||
**Bottom | |||
***[[File:FT2V1.png|FT2V1|615x615px]] | |||
**Top | |||
***[[File:Trinity smcpll.jpg|frameless|613x613px]] | |||
*SMC_POST | |||
**Bottom | |||
***[[File:TrinitySMC_POST.png|R3R22]] | |||
==Corona/Waitsburg/Stingray== | |||
== | === 3.3v, 5v, GND, and RGH 2 i2C === | ||
[[File: | |||
* J2C3 | |||
** [[File:J2C3Corona.png|frameless|418x418px]] | |||
'''CPU_CLK (Only if using an X360 ACE V4/V5)''' | |||
*Top | |||
**[[File:CoronaCPUCLK.png|frameless|417x417px]] | |||
*There are two points circled for C1 and C2 respectively, either can be used or bridged. | |||
===PLL=== | ===PLL=== | ||
*Bottom | *Bottom | ||
**[[File:RGH1.2 Slim PLL.jpg|frameless| | **[[File:RGH1.2 Slim PLL.jpg|frameless|391x391px]] | ||
**No alternative point! | **No alternative point! | ||
===POST & RST=== | ===POST & RST=== | ||
* Bottom | *Bottom | ||
** [[File:Corona POSTandRST.png|frameless| | **[[File:Corona POSTandRST.png|frameless|392x392px]] | ||
** There are two RST points; either can be used. | **There are two RST points; either can be used. | ||
*Top (without postfix adapter) | |||
**[[File:CoronaTrinityPOST.png|500x500px]] | |||
*Top (Postfix Adapter) | *Top (Postfix Adapter) | ||
**[[File:PostfixadapterV1 example.gif|frameless]] | **[[File:PostfixadapterV1 example.gif|frameless|391x391px]] | ||
**If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required. | **If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required. | ||
=== | === SMC === | ||
*The GPIO used for SMC_PLL is also used for Muffin/Mufas | |||
*POST and PLL (Bottom) | |||
**[[File:CoronaSMC.png|SMC_POST and SMC_PLL|533x533px]] | |||
*Alternate SMC_PLL (Top, Southbridge) | |||
**[[File:Coronasmcpost.jpg|frameless|488x488px]] | |||
*Alternate SMC_PLL (Top, DB2G3) | |||
**[[File:CoronaDB2G3.png|frameless|366x366px]] | |||
===Postfix Adapter Installation & Identification Guide=== | |||
* [[File:Full Postfix Guide.png|frameless|2355x2355px]] | |||
Revision as of 10:38, 14 August 2024
Phat
3.3v, 5v, GND, and RGH 2 i2C
1.8V (Only if using an X360 ACE V1/V2/V3)
CPU_RST
EXT_CLK
FT6U1 POST (RGH 1.2 or EXT_CLK)
FT6U7 POST (RGH 1, 2, or 3)
GND
- J2B1 Header
- AV Port
- Any other ground point
PLL
STBY_CLK
SMC
Trinity
3.3v, 5v, GND, and RGH 2 i2C
CPU_CLK (Only if using an X360 ACE V4/V5)
PLL
POST & RST
- Top (without postfix adapter)
- Top (with postfix Adapter)
STBY_CLK
SMC
Corona/Waitsburg/Stingray
3.3v, 5v, GND, and RGH 2 i2C
CPU_CLK (Only if using an X360 ACE V4/V5)
PLL
POST & RST
- Bottom
- Top (without postfix adapter)
- Top (Postfix Adapter)
SMC
- The GPIO used for SMC_PLL is also used for Muffin/Mufas
- POST and PLL (Bottom)
- Alternate SMC_PLL (Top, Southbridge)
- Alternate SMC_PLL (Top, DB2G3)