PS3:Coldboots: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(Created page with "'''WARNING: The tutorials on this page involve modifying files in the flash. There is a potential for something to go wrong and being unable to start up your PS3 properly. Thi...")
 
No edit summary
 
(12 intermediate revisions by 4 users not shown)
Line 1: Line 1:
'''WARNING: The tutorials on this page involve modifying files in the flash. There is a potential for something to go wrong and being unable to start up your PS3 properly. This can be fixed by re-installing your CFW.'''
[[Category:PS3]]
 
{{Warning|The tutorials on this page involve modifying files in the flash. There is a potential for something to go wrong and being unable to start up your PS3 properly. This can be fixed by re-installing your CFW.}}
===Custom Coldboots and PSN Logo===
A coldboot consists of the logo and sound played when your console is booting up. The unmodified version displays "PS3" and plays an orchestra sound effect. With modifications, you can use any image that you want, with any sound up to 8 seconds long. The PSN ball (or logo), on the other hand, is the icon on top of the PSN column on the XMB. For more customization, see the [[PS3:Custom Themes, Fonts, and XMB Waves|themes page]].
 
What is a coldboot? A coldboot consists of the logo and sound played when your console is booting up. The unmodified version displays "PS3" and plays an orchestra sound effect. With modifications, you can use [http://oi39.tinypic.com/2uyhj7c.jpg any images] that you want, with any sound up to 8 seconds long. The PSN ball (or logo), on the other hand, is the icon on top of the PSN column on the XMB. For more customization, see the [[PS3:Themes|themes page]].


'''NOTE: Do not install coldboots that were not designed for your firmware version. This may result in a brick and require you to reinstall your firmware.'''
'''NOTE: Do not install coldboots that were not designed for your firmware version. This may result in a brick and require you to reinstall your firmware.'''


===Coldboot Collection ISO===
==Coldboot Collection ISO==
 
A collection of coldboot logos are available on the [http://store.brewology.com/ahomebrew.php?brewid=303 XMB Mods Collection ISO] [http://www.mediafire.com/download/ew50hhj6ftc8ec3/Coldboots+collection+disc.iso or on the smaller PS3 Coldboots Collection ISO]. You can apply the coldboots as follows:


1. Download and [[PS3:transferring_files|transfer]] the ISO file to /dev_hdd0/PS3ISO/.
A collection of coldboot logos are available on the [http://store.brewology.com/ahomebrew.php?brewid=303 XMB Mods Collection ISO] [https://www.psx-place.com/resources/ps3-coldboots-collection-ps3-extra-iso.30/ or on the smaller PS3 Coldboots Collection ISO]. You can apply the coldboots as follows:


2. Mount the ISO using a backup manager such as Multiman or Webman.
# Download and [[PS3:Transferring Files with FTP|transfer]] the ISO file to `/dev_hdd0/PS3ISO/`.
# Mount the ISO using a backup manager such as Multiman or Webman.
# Select the disk, and choose the desired coldboot.
# Press Cross to install and Yes when prompted. You will be returned to the XMB.
# Reboot to verify that it works.


3. Select the disk, and choose the desired coldboot.
==Creating a Coldboot Logo with RAF Converter==
 
4. Press Cross to install and Yes when prompted. You will be returned to the XMB.
 
5. Reboot to verify that it works.
 
===Creating a Coldboot Logo with RAF Converter===


You will need the following:
You will need the following:


- The completed image you wish to use in place of the PS3 logo
* The completed image you wish to use in place of the PS3 logo
* [[File:Easy+Static+RAF+Converter+v1.0a.zip Easy Static RAF Converter]


- [http://www.mediafire.com/download/7rnjy5n2ki6u6z3/Easy+Static+RAF+Converter+v1.0a.exe Easy Static RAF Converter]
# Extract and open Easy Static RAF Converter and select your image. Any resolution image will work, although it will crop the image to what you see in the preview window.
# Click "Show Preview" and drag the window off to the side so that you can see both windows simultaneously.
# Change the height and width to the size you want; the default custom values are the natural size of the image. An easy way to keep the same size ratio is to use a [http://www.csgnetwork.com/pixelratiocalc.html calculator] and plug in the original numbers, then a custom number for the desired height/width.
# Choose a position or coordinates for the image. The X coordinate can be a negative or positive value (max 1920) from left to right and the Y coordinate can be a negative or positive value (max 1080) top to bottom.
# Select the Convert button; the program may freeze or hang, just click OK and wait for it to say "Done".
# Your newly generated coldboot.raf file will be in a folder named the same as your original image.
# Apply the Coldboot logo using the "Applying the Coldboot or Logo" section below.


1. Open Easy Static RAF Converter and select your image. Any resolution image will work, although it will crop the image to what you see in the preview window.
==Creating a Coldboot Logo with Photoshop==
 
2. Click "Show Preview" and drag the window off to the side so that you can see both windows simultaneously.
 
3. Change the height and width to the size you want; the default custom values are the natural size of the image. An easy way to keep the same size ratio is to use a [http://www.csgnetwork.com/pixelratiocalc.html calculator] and plug in the original numbers, then a custom number for the desired height/width.
 
4. Choose a position or coordinates for the image. The X coordinate can be a negative or positive value (max 1920) from left to right and the Y coordinate can be a negative or positive value (max 1080) top to bottom.
 
5. Select the Convert button; the program may freeze or hang, just click OK and wait for it to say "Done".
 
6. Your newly generated coldboot.raf file will be in a folder named the same as your original image.
 
7. Apply the Coldboot logo using the "Applying the Coldboot or Logo" section below.
 
===Creating a Coldboot Logo with Photoshop===


You will need the following:
You will need the following:


- Adobe Photoshop
* Adobe Photoshop
 
* [http://developer.nvidia.com/object/photoshop_dds_plugins.html Adobe DDS Plugin]
- [http://developer.nvidia.com/object/photoshop_dds_plugins.html Adobe DDS Plugin]
* [http://ps3.brewology.com/downloads/download.php?id=12574&mcid=4 PS3 Boot Logo Creator]
 
- [http://ps3.brewology.com/downloads/download.php?id=12574&mcid=4 PS3 Boot Logo Creator]
 
1. Install the DDS Plugin.
 
2. Open a DDS file in the "Boot Logos" folder and choose "Load using Default Size".
 
3. Edit the image as desired, but **do not change the size of the image**.
 
4. Save the image; when prompted, use the settings "8L 8pp | luminance", 2D Texture, and Generate MIP maps.
 
5. Repeat steps 2-4 the process for all 6 images, making sure not to resize the images.
 
6. Run "Coldboot Creator.exe" and choose the option under "Step 1".
 
7. Click "Convert Pictures" and follow the instructions to convert your DDS files into GTF files.
 
8. Click Browse on each row and select the GTF versions of the files and press Start.
 
9. Click the option under "Step 2" and follow the instructions.
 
10. Click the option under "Step 3" and follow the instructions.
 
11. Browse to the files it asks for and click finish to generate the final Coldboot.raf file.
 
12. Apply the Coldboot logo using the "Applying the Coldboot or Logo" section below.
 
===Creating Coldboot Audio===
 
1. Download and install [http://www.videohelp.com/software/XviD4PSP XviD4PSP].
 
2. Create the sound you want; it can be any normal format as long as it is shorter than 8 seconds long. You can edit and trim files within XviD4PSP if you don't have a sound editor.
 
3. Open the file in XviD4PSP.
 
4. Change the settings to:
 
> Format: Audio
 
> Filtering: Disabled
 
> Color Correction: Disabled
 
> Video Encoding: Disabled
 
> Audio Encoding: A3C 640K Quality
 
5. Click "Encode" and save it with the filename "coldboot_stereo.ac3".
 
6. Click "Encode" again and save it with the filename "coldboot_multi.ac3".
 
7. Apply the Coldboot audio using the "Applying the Coldboot or Logo" section below.
 
===Changing PSN Ball / Logo===
 
====PSN Icons ISO Method====
 
A collection of custom PSN Icons are available on the [http://store.brewology.com/ahomebrew.php?brewid=303 XMB Mods Collection ISO] (or the smaller [https://www.dropbox.com/s/nt2lr1pqoqmtova/PSN%20icons%20collection%20disc.iso?dl=0 PSN Icons Collection ISO]). You can apply the fonts as follows:
 
1. Download and [[PS3:transferring_files|transfer]] the ISO file to /dev_hdd0/PS3ISO/.
 
2. Mount the ISO using a backup manager such as Multiman or Webman.
 
3. Select the disk, and choose the desired icon.
 
4. Press Cross to install and Yes when prompted. You will be returned to the XMB.
 
5. Reboot to verify that it works properly.
 
 
====Manual Method====


1. Download a PSN ball that you like, various packs can be found on Google.
# Install the DDS Plugin.
# Open a DDS file in the "Boot Logos" folder and choose "Load using Default Size".
# Edit the image as desired, but **do not change the size of the image**.
# Save the image; when prompted, use the settings "8L 8pp | luminance", 2D Texture, and Generate MIP maps.
# Repeat steps 2-4 the process for all 6 images, making sure not to resize the images.
# Run "Coldboot Creator.exe" and choose the option under "Step 1".
# Click "Convert Pictures" and follow the instructions to convert your DDS files into GTF files.
# Click Browse on each row and select the GTF versions of the files and press Start.
# Click the option under "Step 2" and follow the instructions.
# Click the option under "Step 3" and follow the instructions.
# Browse to the files it asks for and click finish to generate the final Coldboot.raf file.
# Apply the Coldboot logo using the "Applying the Coldboot or Logo" section below.


2. Extract the one you want and make sure it is named as "xmb_plugin_normal.rco".
==Creating Coldboot Audio==


3. Apply the PSN logo using the "Applying the Coldboot or Logo" section below.
# Download and install [http://www.videohelp.com/software/XviD4PSP XviD4PSP].
# Create the sound you want; it can be any normal format as long as it is shorter than 8 seconds long. You can edit and trim files within XviD4PSP if you don't have a sound editor.
# Open the file in XviD4PSP.
# Change the settings to:
#:Format: Audio
#:Filtering: Disabled
#:Color Correction: Disabled
#:Video Encoding: Disabled
#:Audio Encoding: A3C 640K Quality
# Click "Encode" and save it with the filename "coldboot_stereo.ac3".
# Click "Encode" again and save it with the filename "coldboot_multi.ac3".
# Apply the Coldboot audio using the "Applying the Coldboot or Logo" section below.


===Applying the Coldboot or Logo===
==Changing PSN Ball / Logo==


1. Enable writing to flash on your PS3. This can be done with a pkg file for your specific CFW, or enabled in Rebug Toolbox for Rebug systems.
===PSN Icons ISO Method===


2. [[PS3:transferring_files|FTP]] into your PS3 and browse to /dev_flash/. This directory may be called /dev_blind/ or /dev_rebug/ depending on your system. It does not always appear even if you enabled writing to flash, so try manually typing in the directory name to get to it.
A collection of custom PSN Icons are available on the [http://store.brewology.com/ahomebrew.php?brewid=303 XMB Mods Collection ISO] (or the smaller [[Media:PSN icons collection disc.iso|PSN Icons Collection ISO]]). You can apply the fonts as follows:


3. Download the file(s) you will be replacing to your PC (coldboot.raf, coldboot_stereo.ac3, coldboot_multi.ac3, and/or xmb_plugin_normal.rco) and keep them in a safe place in case something looks wrong and you want to revert back.
# Download and [[PS3:Transferring Files with FTP|transfer]] the ISO file to /dev_hdd0/PS3ISO/.
# Mount the ISO using a backup manager such as Multiman or Webman.
# Select the disk, and choose the desired icon.
# Press Cross to install and Yes when prompted. You will be returned to the XMB.
# Reboot to verify that it works properly.


4. Copy the coldboot.raf, coldboot_stereo.ac3, coldboot_multi.ac3, and/or xmb_plugin_normal.rco file(s) you generated to /dev_flash/vsh/resource.
===Manual Method===


5. Reboot and enjoy your new mods! It is suggested to disable writing to flash on your PS3 to prevent corruption on reboots.
# Download a PSN ball that you like, various packs can be found on Google.
# Extract the one you want and make sure it is named as "xmb_plugin_normal.rco".
# Apply the PSN logo using the "Applying the Coldboot or Logo" section below.


* If your console does not boot properly, boot your console into [http://community.us.playstation.com/t5/PlayStation-3-Support/How-to-access-the-PlayStation-3-Recovery-Menu/td-p/19195118 recovery mode] and [https://www.reddit.com/r/ps3homebrew/wiki/installing_cfw re-install your firmware]
==Applying the Coldboot or Logo==


# Enable writing to flash on your PS3. This can be done with a pkg file for your specific CFW, or enabled in Rebug Toolbox for Rebug systems.
# [[PS3:Transferring Files with FTP|FTP]] into your PS3 and browse to `/dev_flash/`. This directory may be called `/dev_blind/` or `/dev_rebug/` depending on your system. It does not always appear even if you enabled writing to flash, so try manually typing in the directory name to get to it.
# Download the file(s) you will be replacing to your PC (coldboot.raf, coldboot_stereo.ac3, coldboot_multi.ac3, and/or xmb_plugin_normal.rco) and keep them in a safe place in case something looks wrong and you want to revert back.
# Copy the coldboot.raf, coldboot_stereo.ac3, coldboot_multi.ac3, and/or xmb_plugin_normal.rco file(s) you generated to `/dev_flash/vsh/resource`.
# Reboot and enjoy your new mods! It is suggested to disable writing to flash on your PS3 to prevent corruption on reboots.
#* If your console does not boot properly, boot your console into [[PS3:Safe Mode|safe mode]] and [[PS3:Updating your Firmware|re-install your firmware]].


===Troubleshooting===
==Troubleshooting==


If your console has strange issues, such as hanging when launching apps, reinstall your firmware to reset it to a working state.
If your console has strange issues, such as hanging when launching apps, reinstall your firmware to reset it to a working state.

Latest revision as of 17:12, 19 September 2024

Exclamation-triangle-fill.svgThe tutorials on this page involve modifying files in the flash. There is a potential for something to go wrong and being unable to start up your PS3 properly. This can be fixed by re-installing your CFW.


A coldboot consists of the logo and sound played when your console is booting up. The unmodified version displays "PS3" and plays an orchestra sound effect. With modifications, you can use any image that you want, with any sound up to 8 seconds long. The PSN ball (or logo), on the other hand, is the icon on top of the PSN column on the XMB. For more customization, see the themes page.

NOTE: Do not install coldboots that were not designed for your firmware version. This may result in a brick and require you to reinstall your firmware.

Coldboot Collection ISO

A collection of coldboot logos are available on the XMB Mods Collection ISO or on the smaller PS3 Coldboots Collection ISO. You can apply the coldboots as follows:

  1. Download and transfer the ISO file to /dev_hdd0/PS3ISO/.
  2. Mount the ISO using a backup manager such as Multiman or Webman.
  3. Select the disk, and choose the desired coldboot.
  4. Press Cross to install and Yes when prompted. You will be returned to the XMB.
  5. Reboot to verify that it works.

Creating a Coldboot Logo with RAF Converter

You will need the following:

  • The completed image you wish to use in place of the PS3 logo
  • [[File:Easy+Static+RAF+Converter+v1.0a.zip Easy Static RAF Converter]
  1. Extract and open Easy Static RAF Converter and select your image. Any resolution image will work, although it will crop the image to what you see in the preview window.
  2. Click "Show Preview" and drag the window off to the side so that you can see both windows simultaneously.
  3. Change the height and width to the size you want; the default custom values are the natural size of the image. An easy way to keep the same size ratio is to use a calculator and plug in the original numbers, then a custom number for the desired height/width.
  4. Choose a position or coordinates for the image. The X coordinate can be a negative or positive value (max 1920) from left to right and the Y coordinate can be a negative or positive value (max 1080) top to bottom.
  5. Select the Convert button; the program may freeze or hang, just click OK and wait for it to say "Done".
  6. Your newly generated coldboot.raf file will be in a folder named the same as your original image.
  7. Apply the Coldboot logo using the "Applying the Coldboot or Logo" section below.

Creating a Coldboot Logo with Photoshop

You will need the following:

  1. Install the DDS Plugin.
  2. Open a DDS file in the "Boot Logos" folder and choose "Load using Default Size".
  3. Edit the image as desired, but **do not change the size of the image**.
  4. Save the image; when prompted, use the settings "8L 8pp | luminance", 2D Texture, and Generate MIP maps.
  5. Repeat steps 2-4 the process for all 6 images, making sure not to resize the images.
  6. Run "Coldboot Creator.exe" and choose the option under "Step 1".
  7. Click "Convert Pictures" and follow the instructions to convert your DDS files into GTF files.
  8. Click Browse on each row and select the GTF versions of the files and press Start.
  9. Click the option under "Step 2" and follow the instructions.
  10. Click the option under "Step 3" and follow the instructions.
  11. Browse to the files it asks for and click finish to generate the final Coldboot.raf file.
  12. Apply the Coldboot logo using the "Applying the Coldboot or Logo" section below.

Creating Coldboot Audio

  1. Download and install XviD4PSP.
  2. Create the sound you want; it can be any normal format as long as it is shorter than 8 seconds long. You can edit and trim files within XviD4PSP if you don't have a sound editor.
  3. Open the file in XviD4PSP.
  4. Change the settings to:
    Format: Audio
    Filtering: Disabled
    Color Correction: Disabled
    Video Encoding: Disabled
    Audio Encoding: A3C 640K Quality
  5. Click "Encode" and save it with the filename "coldboot_stereo.ac3".
  6. Click "Encode" again and save it with the filename "coldboot_multi.ac3".
  7. Apply the Coldboot audio using the "Applying the Coldboot or Logo" section below.

PSN Icons ISO Method

A collection of custom PSN Icons are available on the XMB Mods Collection ISO (or the smaller PSN Icons Collection ISO). You can apply the fonts as follows:

  1. Download and transfer the ISO file to /dev_hdd0/PS3ISO/.
  2. Mount the ISO using a backup manager such as Multiman or Webman.
  3. Select the disk, and choose the desired icon.
  4. Press Cross to install and Yes when prompted. You will be returned to the XMB.
  5. Reboot to verify that it works properly.

Manual Method

  1. Download a PSN ball that you like, various packs can be found on Google.
  2. Extract the one you want and make sure it is named as "xmb_plugin_normal.rco".
  3. Apply the PSN logo using the "Applying the Coldboot or Logo" section below.

  1. Enable writing to flash on your PS3. This can be done with a pkg file for your specific CFW, or enabled in Rebug Toolbox for Rebug systems.
  2. FTP into your PS3 and browse to /dev_flash/. This directory may be called /dev_blind/ or /dev_rebug/ depending on your system. It does not always appear even if you enabled writing to flash, so try manually typing in the directory name to get to it.
  3. Download the file(s) you will be replacing to your PC (coldboot.raf, coldboot_stereo.ac3, coldboot_multi.ac3, and/or xmb_plugin_normal.rco) and keep them in a safe place in case something looks wrong and you want to revert back.
  4. Copy the coldboot.raf, coldboot_stereo.ac3, coldboot_multi.ac3, and/or xmb_plugin_normal.rco file(s) you generated to /dev_flash/vsh/resource.
  5. Reboot and enjoy your new mods! It is suggested to disable writing to flash on your PS3 to prevent corruption on reboots.

Troubleshooting

If your console has strange issues, such as hanging when launching apps, reinstall your firmware to reset it to a working state.