CRT:Accessing the Service Menu

If you need to access the service menu of your set, check the service manual for specific instructions on how to access it. If you can't locate the service manual, try some of the general patterns below for your brand.

Service Menu Button Combos

JVC

• Press [Sleep] on remote to display "sleep timer 0 min." on the screen. Press [Video Status] and [Display] at the same time.

Ikegami

On HTM models, old ESC for 5 seconds to access a hidden geometry adjustment menu.

Konka

• Press [Mute], [Timer], and [Picture] buttons on the remote control in that order within '2' seconds.

LG

• Hold the [OK] button on the remote and the [OK] button on the TV for 10 seconds.
• Hold the [Menu] button on the remote and the [Menu] button on the TV for 10 seconds.

NetTV

• Hold the power button and unplug the TV. Reinsert the plug while still holding the power button.

Philco

• Hold the [Menu] button on the TV and press number [2] on the remote.

RCA

• Truflat models: Hold [Volume Down] until it reaches 0. Hold [Volume Down] on the TV and [Info] on the remote.

Sanyo

• Unplug the TV then hold down the [Menu] button while you plug it back in.
• Unplug the TV then hold down the [Volume Down] button while you plug it back in.
• Unplug the TV then hold down the [Mute] button while you plug it back in.

Sony

WEGA

• From a powered-off state, press:
  • [DISP], [5], [PWR ON]
  • or
  • [DISP], [5], [VOL+], [PWR ON]
  • or
  • [DISP], [5], [VOL+], [PICTURE], [PWR ON]
• To save changed settings:
  • [Muting], [Enter]

Older Models

• From a powered-off state:
  • Hold both [Prog+] and [Prog-] buttons on the TV and press the power button. Then, press [1] on the remote to open the service menu.
  • Hold both [Prog+] and [Prog-] buttons on the TV and press the power button. Then, press [Menu] on the remote to open the service menu.

Toshiba

• Hold [Volume Down] on the TV and number [6] on the remote.
• Hold [Volume Down] on the TV and number [9] on the remote.

Zenith

• Hold down the [Menu] button on the remote until a message appears. Release the [Menu] button and within two seconds, press [9], [8], [7], [6], [Enter].
• Hold down the [Menu] button on the remote until a message appears. Release the [Menu] button and within two seconds, press [9], [8], [7], [6], [Display].
• Press and hold the [Menu] button on the remote. Press and hold the [Menu] button on the TV until the service menu is displayed.
• Press and hold the [Menu] button on the remote control until a password screen is displayed. Try the following passwords:
  • 0-0-0-0
  • 8-7-4-1
  • 7-7-7-7

Hidden Service Menu Buttons

Some remotes have a hidden button to access the service menu. You will need to open the remote to access the button and optionally drill a hole in the remote shell so you can press the button without having to open the remote. If your service manual mentions a separate "service remote", your retail remote may have a hidden button.

Alternatively, your remote may have a small hole in it that you can insert a paperclip to press a hidden service menu button.

Palsonic RC-N33M-0A

NEC RE-001