CRT:1084S-P: Difference between revisions
(Created page with "{{Infobox/CRT |model = Commodore 1084S-P |image = |manufacturer = Philips (OEM for Commodore) |type = Consumer |size = 14" |dimensions = |weight = |tvl = |dot_pitch = 0,42 mm |regions = PAL '''or''' NTSC depending on model, RGB |240p/480i = Yes |480p = No |720p = No |1080i = No |vsync = 50/60Hz |widescreen = No |composite = 1x rear (RCA) |s-video = 1x rear (twin RCA, shared with composite) |rgb = 2x rear (8-pin DIN digital, 6-pin DIN analog, connect only one) |audio_i...") |
m (Text replacement - "\|service_bulletins \= \n" to "") |
||
| (One intermediate revision by the same user not shown) | |||
| Line 9: | Line 9: | ||
|tvl = | |tvl = | ||
|dot_pitch = 0,42 mm | |dot_pitch = 0,42 mm | ||
|regions = PAL '''or''' NTSC depending on model | |regions = PAL '''or''' NTSC depending on model | ||
|240p/480i = Yes | |240p/480i = Yes | ||
|480p = No | |480p = No | ||
| Line 18: | Line 18: | ||
|composite = 1x rear (RCA) | |composite = 1x rear (RCA) | ||
|s-video = 1x rear (twin RCA, shared with composite) | |s-video = 1x rear (twin RCA, shared with composite) | ||
| | |component = 2x rear RGB (8-pin DIN digital, 6-pin DIN analog, connect only one) | ||
|audio_input = 1x rear (twin RCA, shared between all inputs) | |audio_input = 1x rear (twin RCA, shared between all inputs) | ||
|chassis = Philips CM8833 variant | |chassis = Philips CM8833 variant | ||
| Line 25: | Line 25: | ||
|operation_manual = | |operation_manual = | ||
|service_manual = [https://gona.mactar.hu/Commodore/monitor/Commodore_monitors_by_model_number.html] | |service_manual = [https://gona.mactar.hu/Commodore/monitor/Commodore_monitors_by_model_number.html] | ||
|brochure = | |brochure = | ||
}} | }} | ||
Latest revision as of 04:19, 1 November 2023
| Information | |
|---|---|
| Manufacturer | Philips (OEM for Commodore) |
| Type | Consumer |
| Size | 14" |
| Dot Pitch | 0,42 mm |
| Regions | PAL or NTSC depending on model |
| 240p/480i | Yes |
| 480p | No |
| 720p | No |
| 1080i | No |
| Vsync | 50/60Hz |
| Widescreen | No |
| Composite | 1x rear (RCA) |
| S-Video | 1x rear (twin RCA, shared with composite) |
| Component | 2x rear RGB (8-pin DIN digital, 6-pin DIN analog, connect only one) |
| Audio Input | 1x rear (twin RCA, shared between all inputs) |
| Links | |
| Chassis | Philips CM8833 variant |
| Remote | None |
| Standard Boards | TTL video DAC (see article) |
| Service Manual | [1] |
Variant of the Philips/Commodore CRT:1084-P, itself based on the Philips CRT:CM8833 and CRT:CM8850, adding stereo sound and a headphone jack.
NTSC version can be identified by the 120 V power input, front hue control, and 4 rear controls for size and position. PAL version is 220 V, lacks a hue control, and moves the horizontal position knob to the front.
Digital input is for CGA-compatible signal (5 volt RGBIHV), linear input is for SCART-compatible signal (RGBS). Very early production DAC card (possibly not used in 1084S-P) also supports Apple XRGB, selected via a dedicated pin unused on later versions. S-Video support (called LCA: Luma/Chroma/Audio) pre-dates its name or the de facto standard mini-DIN connector.
VCR switch increases horizontal sync for better compatibility with unstable signals (ie analog videotape).
Flyback: Philips AT2079-30102 = Diemen HR7506 = Eldor 11421395
Mods
The PCB and back cover can readily be upgraded with a SCART socket, as well as with a green-only filter circuit (present on other variants of the CM8833/50).