AV:COMP2DVI

The COMP2DVI takes an analog component YPbPr input and routes the signal to the analog pins of a DVI connector. The Comp Cleaner is an open-source (CERN OHLv2) device, designed to filter 240p - 1080i YPbPr component video signals for use with digital devices, such as flat-screen TV's and capture cards. This will allow more flexibility to your setup, depending on your target capture card or device.

The source gerbers, as well as the Eagle design files, can be downloaded here:

• Source Files (GitHub)

DIP Switch Settings

The settings are printed on the back of the PCB, but can be referenced here:

DVI-I Cable / Connector

This can connect to your capture card via a DVI-I or DVI-A cable or coupler. Ensure your DVI cable you are using has the analog pins, otherwise it won't work!

• DVI-I Cables: [1] [2]
• DVI-I Coupler: https://ebay.to/2DUk9BD https://www.mycablemart.com/store/cart.php?m=product\_detail&p=5987

Full Bill Of Materials

https://github.com/retrorgb/COMP2DVI/blob/master/COMP2DVI\_BOM.xlsx