Vita:Swapping X/O Buttons: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
(Initial page add)
 
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
This is done through the acessibkity menu and can be used to change any button to any other button.
On consoles from NTSC-J regions, the X and O buttons are swapped in the LiveArea. If this behavior is undesirable, it can be changed with HENkaku.


= How to swap X with O =
It is preferred to swap the button assignments with HENkaku instead of accessability settings, as it won't interfere with the button assignments in other games and applications.
* Open Settings
 
* Scroll down and open Accessibility
# If Henkaku is not enabled, enable it by following a [[Vita:Getting Started|homebrew/CFW guide]].
* Select Button Assignments
# Open the settings application.
* Check "Enable Custom Button Assignments"
# Open <code>Henkaku Settings</code>
* Open "Customise Button Assignments"
# Scroll down until you see <code>O Button Behaviour</code>. Set it to cancel instead of confirm.
* Select "X -> X" and change to "O"

Latest revision as of 17:51, 28 June 2024

On consoles from NTSC-J regions, the X and O buttons are swapped in the LiveArea. If this behavior is undesirable, it can be changed with HENkaku.

It is preferred to swap the button assignments with HENkaku instead of accessability settings, as it won't interfere with the button assignments in other games and applications.

  1. If Henkaku is not enabled, enable it by following a homebrew/CFW guide.
  2. Open the settings application.
  3. Open Henkaku Settings
  4. Scroll down until you see O Button Behaviour. Set it to cancel instead of confirm.