CRT:Terraneo MT10: Difference between revisions
(Created page with "{{Infobox/CRT |model = Terraneo MT10 |image = |manufacturer = Terraneo, BTicino |type = Industrial |size = 5" |dimensions = |weight = |tvl = |earliest = < 1992 |latest = > 1992 |regions = EIA+CCIR |240p/480i = Yes |480p = No |vsync = 50/60 Hz |widescreen = No |rf = 0 |composite = 1 (See text) |audio_input = None |chassis = LT 1 66 0216 3 |tube = VTM M13-191W |remote = None |operation_manual = |service_manual = |service_bulletins = |brochure = }} The '''Terraneo MT...") |
m (Text replacement - "\|service_bulletins \= \n" to "") |
||
| Line 23: | Line 23: | ||
|operation_manual = | |operation_manual = | ||
|service_manual = | |service_manual = | ||
|brochure = | |brochure = | ||
}} | }} | ||
Latest revision as of 04:29, 1 November 2023
| Information | |
|---|---|
| Manufacturer | Terraneo, BTicino |
| Type | Industrial |
| Size | 5" |
| Regions | EIA+CCIR |
| 240p/480i | Yes |
| 480p | No |
| Vsync | 50/60 Hz |
| Widescreen | No |
| RF | 0 |
| Composite | 1 (See text) |
| Audio Input | None |
| Earliest Date | < 1992 |
| Latest Date | > 1992 |
| Links | |
| Chassis | LT 1 66 0216 3 |
| Tube | VTM M13-191W |
| Remote | None |
The Terraneo MT10 is an Italian miniature black and white monitor for video intercom and CCTV use.
Flyback: Eldor 1082.0101
Deflection processor with vertical amplifier: TEA 2037A
Deflection coils: Eldor 1400.2600
Variants
- MT/MS: Tabletop or wall-mount (with factory inverted deflection)
- 10/11/20: currently undocumented variants, for Videoporter 2000 system
- 50: for Videoporter 2004 system (uses a proprietary encoding for video, but gets decoded by a converter external from the monitor proper)
- 60 (only MT version): for Tercontrol system, standalone CCTV display using a Belling-Lee socket for composite video (also an MT10 with tacked on external power supply)
Connectors
Most models use 5 screw terminals (found on the bottom) for power and video, connected on the inside with a flat cable going to the input socket on the PCB. The MT60 is an exception: the terminals are missing (but their holes are present) and a larger additional hole next to them allows said cable to connect directly the chassis, the power supply, and the video connector.
Please disassemble your monitor and inspect said cable for the pinout: signals reaching the PCB are, front to back, GND/+12V/nc/Video/GND
All models require an external 75 ohm terminator for use with standard composite video sources!
Controls
External: power (MT60 only), brightness, contrast (video gain)
Internal: Vertical size, horizontal frequency, H and V linearity, focus, B+ voltage (MT60 only, inside base)
External links
- Gallery by xAD (MT10) including standard connector mod
- Gallery by Ryccardo (MT60) including disassembly guide