CRT:Sony GDM-F500: Difference between revisions
(infobox) |
Slim Dread (talk | contribs) (changed 'facelift' to revision) |
||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{Infobox/CRT | {{Infobox/CRT | ||
|model = GDM-F500 | |model = GDM-F500 | ||
|image = | |image =GDM-F500.png | ||
|manufacturer = | |manufacturer = Sony | ||
|type = PC | |type = PC | ||
|tube_series = Trinitron | |tube_series = FD Trinitron | ||
|size = 21" | |size = 21" | ||
|viewable_size = 19.8" | |viewable_size = 19.8" | ||
|dot_pitch = 0.22mm | |dot_pitch = 0.22mm | ||
|mask = Aperture Grille | |mask = Aperture Grille | ||
|free_scan = Yes | |free_scan = Yes | ||
|horizontal_scan = 30 - 121kHz | |horizontal_scan = 30 - 121kHz | ||
| Line 27: | Line 17: | ||
|osd_color = Bias + Gain | |osd_color = Bias + Gain | ||
|osd_convergence = Yes | |osd_convergence = Yes | ||
|osd_focus = | |osd_focus = | ||
|vga = 1x | |vga = 1x | ||
|other_inputs = 1x RGBHV BNC | |other_inputs = 1x RGBHV BNC | ||
|chassis = N3P | |dimensions = | ||
|tube = | Width: 50.2 cm | ||
Depth: 48.6 cm | |||
Height: 51.1 cm | |||
|weight = 74.9 lbs | |||
|dynamic_convergence = No | |||
|service_method = PC (WinDAS) | |||
|service_port = TTL serial | |||
|earliest = ? | |||
|latest = ? | |||
|chassis = [[CRT:Sony N3P Chassis|N3P]] | |||
|tube = M50LRB16X | |||
|operation_manual = | |operation_manual = | ||
|service_manual = | |service_manual = | ||
| Line 37: | Line 37: | ||
}} | }} | ||
==Description== | |||
The Sony GDM-F500 is a 21" class PC CRT Monitor from Sony FD Trinitron brand. Built on a modified Sony N3 chassis, designated N3P, this model premiered the FD Trinitron "Flat Display" technology (with the former models being only vertically flat) in it's size class. At the same time, GDM-F500, along with its 19" counterpart, featured the most advanced aperture grille tube of its time, with 0.22mm dot pitch. This tube was then carried over to the revision model [[CRT:Sony GDM-F500R|GDM-F500R]] and also to the successor model [[CRT:Sony GDM-F520|GDM-F520]]. | |||
==Media== | |||
== | == Notes == | ||
As the original N3 chassis was not originally developed for the FD Trinitron screen, the F500 was quite an afterthought. Model was plagued with reliability issues right from the start, with geometry anomalies and loss of focus as a common symptoms. The result and a solution to this was a development of a new chassis designation G1, on which the revision model GDM-F500R was built. The failed or problematic F500 units submitted for RMA were exchanged for the new revision model later on. | |||
Latest revision as of 12:12, 17 August 2024
| Information | ||
|---|---|---|
| Manufacturer | Sony | |
| Type | PC | |
| Tube Series | FD Trinitron | |
| Size | 21" | |
| Viewable Size | 19.8" | |
| Dot Pitch | 0.22mm | |
| Mask | Aperture Grille | |
| Free-Scan | Yes | |
| Horizontal Scan | 30 - 121kHz | |
| Vertical Scan | 48 - 160Hz | |
| Unlocked Ranges | ? | |
| OSD Color | Bias + Gain | |
| OSD Conv. | Yes | |
| Dynamic Conv. | No | |
| Service Method | PC (WinDAS) | |
| Service Port | TTL serial | |
| VGA | 1x | |
| Other Inputs | 1x RGBHV BNC | |
| Dimensions | Width: 50.2 cm
Depth: 48.6 cm Height: 51.1 cm | |
| Weight | 74.9 lbs | |
| Earliest Date | ? | |
| Latest Date | ? | |
| Links | ||
| Chassis | N3P | |
| Tube | M50LRB16X | |
Description
The Sony GDM-F500 is a 21" class PC CRT Monitor from Sony FD Trinitron brand. Built on a modified Sony N3 chassis, designated N3P, this model premiered the FD Trinitron "Flat Display" technology (with the former models being only vertically flat) in it's size class. At the same time, GDM-F500, along with its 19" counterpart, featured the most advanced aperture grille tube of its time, with 0.22mm dot pitch. This tube was then carried over to the revision model GDM-F500R and also to the successor model GDM-F520.
Media
Notes
As the original N3 chassis was not originally developed for the FD Trinitron screen, the F500 was quite an afterthought. Model was plagued with reliability issues right from the start, with geometry anomalies and loss of focus as a common symptoms. The result and a solution to this was a development of a new chassis designation G1, on which the revision model GDM-F500R was built. The failed or problematic F500 units submitted for RMA were exchanged for the new revision model later on.