Xbox 360:Alternate Solder Points: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
m (Kitty cat)
m (Text replacement - "Category:Xbox360" to "Category:Xbox 360")
 
(2 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[Category:Xbox360]]
[[Category:Xbox 360]]
== Phat ==
== Phat ==


Line 5: Line 5:


* J2B1
* J2B1
** [[File:J2B1.png|482x482px]]
** [[File:J2B1.png|500x500px]]


=== 1.8V '''(Only if using an X360 ACE V1/V2/V3)''' ===
=== 1.8V '''(Only if using an X360 ACE V1/V2/V3)''' ===
Line 79: Line 79:
=== CPU_CLK '''(Only if using an X360 ACE V4/V5)''' ===
=== CPU_CLK '''(Only if using an X360 ACE V4/V5)''' ===
*Top (HANA)
*Top (HANA)
**[[File:TrinityC1C2.png|frameless|431x431px]]
**[[File:TrinityC1C2.png|frameless|390x390px]]
** There are two points circled for C1 and C2 respectively; either can be used or bridged.
** There are two points circled for C1 and C2 respectively; either can be used or bridged.


*Bottom
*Bottom
**[[File:TrinityBottomC1C2.png|frameless|576x576px]]
**[[File:TrinityBottomC1C2.png|frameless|520x520px]]


===PLL===
===PLL===


*Bottom
*Bottom (Requires scraping)
**[[File:RGH1.2 Slim PLL.jpg|frameless|497x497px]]
**[[File:RGH1.2 Slim PLL.jpg|frameless|391x391px]]
**'''No alternative point!'''
**'''No alternative point!'''


Line 94: Line 94:


* Bottom
* Bottom
** [[File:TrinityPOSTandRST.png|frameless|700x700px]]
** [[File:TrinityPOSTandRST.png|frameless|517x517px]]
** There are two RST points, either can be used.
** There are two RST points, either can be used.


*Top (without postfix adapter)
*Top (without postfix adapter, requires scraping)
**[[File:CoronaTrinityPOST.png|700x700px]]
**[[File:CoronaTrinityPOST.png|523x523px]]
*Top (with postfix Adapter)
*Top (with postfix Adapter)
**[[File:PostfixadapterV1 example.gif|frameless|700x700px]]
**[[File:PostfixadapterV1 example.gif|frameless|524x524px]]
** A Postfix adapter can be used on Trinity in case the POST point is damaged.
** A Postfix adapter can be used on Trinity in case the POST point is damaged.
** The post pad you use on the adapter does not matter, as they connect to the same spot on the CPU anyway. It was only used for tuning the boot times of early I2C RGH methods.


===STBY_CLK===
===STBY_CLK===
*C3B10 (Top)
*C3B10 (Top)
**[[File:TrinityHanaCLK.jpg|frameless|700x700px]]
**[[File:TrinityHanaCLK.jpg|frameless|516x516px]]


*FT3N2 (Bottom)
*FT3N2 (Bottom)
**[[File:Ft3n2.jpg|frameless|700x700px]]
**[[File:Ft3n2.jpg|frameless|512x512px]]


=== SMC ===
=== SMC ===
*SMC_PLL is also used for Muffin/Mufas
*The GPIO used for SMC_PLL is also used for Muffin/Mufas
*SMC_PLL
*SMC_PLL
**Bottom
**Bottom
***[[File:FT2V1.png|FT2V1|615x615px]]
***[[File:FT2V1.png|FT2V1|485x485px]]
**Top
** Bottom (Alt point, requires scraping)
***[[File:Trinity smcpll.jpg|frameless|613x613px]]
***[[File:Trinity GPIO.png|483x483px]]
**Top (Alt point; preferred for Muffin/Mufas)
***[[File:Trinity smcpll.jpg|frameless|482x482px]]
*SMC_POST
*SMC_POST
**Bottom
**Bottom
Line 142: Line 145:
**There are two RST points; either can be used.
**There are two RST points; either can be used.
*Top (without postfix adapter)
*Top (without postfix adapter)
**[[File:CoronaTrinityPOST.png|500x500px]]
**[[File:CoronaTrinityPOST.png|394x394px]]
*Top (Postfix Adapter)
*Top (Postfix Adapter)
**[[File:PostfixadapterV1 example.gif|frameless|391x391px]]
**[[File:PostfixadapterV1 example.gif|frameless|396x396px]]
**If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.
**If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.
**The post pad you use on the adapter does not matter, as they connect to the same spot on the CPU anyway. It was only used for tuning the boot times of early I2C RGH methods.


=== SMC ===
=== SMC ===
*The GPIO used for SMC_PLL is also used for Muffin/Mufas
*The GPIO used for SMC_PLL is also used for Muffin/Mufas
*POST and PLL (Bottom)
*POST and PLL (Bottom)
**[[File:CoronaSMC.png|SMC_POST and SMC_PLL|533x533px]]
**[[File:CoronaSMC.png|SMC_POST and SMC_PLL|394x394px]]
*Alternate SMC_PLL (Top, Southbridge)
*Alternate SMC_PLL (Top, southbridge. Requires scraping.)
**[[File:Coronasmcpost.jpg|frameless|488x488px]]
**[[File:Coronasmcpost.jpg|frameless|525x525px]]
*Alternate SMC_PLL (Top, DB2G3)
*Alternate SMC_PLL (Top, DB2G3. Preferred for Muffin/Mufas.)
**[[File:CoronaDB2G3.png|frameless|366x366px]]
**[[File:CoronaDB2G3.png|frameless|391x391px]]


===Postfix Adapter Installation & Identification Guide===
===Postfix Adapter Installation & Identification Guide===


* [[File:Full Postfix Guide.png|frameless|2355x2355px]]
* [[File:Full Postfix Guide.png|frameless|1532x1532px]]

Latest revision as of 20:22, 4 September 2024

Phat

3.3v, 5v, GND, and RGH 2 i2C

  • J2B1
    • J2B1.png

1.8V (Only if using an X360 ACE V1/V2/V3)

  • Non-Xenon
    • 1v8-HDMI.png
  • Xenon
    • 1v8-Xenon.png
PLL Repair on a Phat motherboard (required if bottom pad is damaged). Image credit to TheLazyITGuy.

CPU_RST

  • C7R112
    • RST.png
  • R8C2
    • VXi9LgC.jpg
  • J8C1
    • Will not work with EXT_CLK.
    • Cp2OBF3.jpeg

EXT_CLK

  • Bottom (Under CPU)
    • EXT CLK.png

FT6U1 POST (RGH 1.2 or EXT_CLK)

  • Bottom
    • Post.png
  • Top (requires scraping)
    • FT6U1 topside.png

FT6U7 POST (RGH 1, 2, or 3)

  • Bottom
    • WEFEjMr.jpg
  • Top (requires scraping)
    • (requires scraping)

GND

PLL

  • Bottom
    • Fat360PLL.jpg
  • Top (under CPU heatsink; requires scraping)
    • Fat360topPLL.jpg

STBY_CLK

  • Top (Xenon)
    • STBY CLK-Xenon.png
  • Top (Non-Xenon)
    • Fat360STBY CLK.jpg
    • There are 2 points boxed; either can be used.
  • Bottom (Non-Xenon)
    • CLK.png

SMC

  • POST and PLL (Bottom)
    • PhatRGH3SMC.png
    • Alternative SMC_PLL (Top)
      • Topsidepoint.png

Trinity

3.3v, 5v, GND, and RGH 2 i2C

  • J2C3
    • J2C3Trinity.png

CPU_CLK (Only if using an X360 ACE V4/V5)

  • Top (HANA)
    • TrinityC1C2.png
    • There are two points circled for C1 and C2 respectively; either can be used or bridged.
  • Bottom
    • TrinityBottomC1C2.png

PLL

  • Bottom (Requires scraping)
    • RGH1.2 Slim PLL.jpg
    • No alternative point!

POST & RST

  • Bottom
    • TrinityPOSTandRST.png
    • There are two RST points, either can be used.
  • Top (without postfix adapter, requires scraping)
    • CoronaTrinityPOST.png
  • Top (with postfix Adapter)
    • PostfixadapterV1 example.gif
    • A Postfix adapter can be used on Trinity in case the POST point is damaged.
    • The post pad you use on the adapter does not matter, as they connect to the same spot on the CPU anyway. It was only used for tuning the boot times of early I2C RGH methods.

STBY_CLK

  • C3B10 (Top)
    • TrinityHanaCLK.jpg
  • FT3N2 (Bottom)
    • Ft3n2.jpg

SMC

  • The GPIO used for SMC_PLL is also used for Muffin/Mufas
  • SMC_PLL
    • Bottom
      • FT2V1
    • Bottom (Alt point, requires scraping)
      • Trinity GPIO.png
    • Top (Alt point; preferred for Muffin/Mufas)
      • Trinity smcpll.jpg
  • SMC_POST
    • Bottom
      • R3R22

Corona/Waitsburg/Stingray

3.3v, 5v, GND, and RGH 2 i2C

  • J2C3
    • J2C3Corona.png

CPU_CLK (Only if using an X360 ACE V4/V5)

  • Top
    • CoronaCPUCLK.png
  • There are two points circled for C1 and C2 respectively, either can be used or bridged.

PLL

  • Bottom
    • RGH1.2 Slim PLL.jpg
    • No alternative point!

POST & RST

  • Bottom
    • Corona POSTandRST.png
    • There are two RST points; either can be used.
  • Top (without postfix adapter)
    • CoronaTrinityPOST.png
  • Top (Postfix Adapter)
    • PostfixadapterV1 example.gif
    • If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.
    • The post pad you use on the adapter does not matter, as they connect to the same spot on the CPU anyway. It was only used for tuning the boot times of early I2C RGH methods.

SMC

  • The GPIO used for SMC_PLL is also used for Muffin/Mufas
  • POST and PLL (Bottom)
    • SMC_POST and SMC_PLL
  • Alternate SMC_PLL (Top, southbridge. Requires scraping.)
    • Coronasmcpost.jpg
  • Alternate SMC_PLL (Top, DB2G3. Preferred for Muffin/Mufas.)
    • CoronaDB2G3.png

Postfix Adapter Installation & Identification Guide

  • Full Postfix Guide.png
Retrieved from "https://consolemods.org/wiki/index.php?title=Xbox_360:Alternate_Solder_Points&oldid=47453"