SNES:Tightening Cartridge Lever: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
[[Category:RetroRGB Migration Hold]]
If your cartridge lever is loose on your launch model SNES, you can take the console apart and move the bottom end of the spring into the hole on the left. This will add more tension on the spring and make the cartridge release lever much more firm.
**Loose Cartridge Lever on SNES 1**


If your cartridge release lever isn't as firm as it used to be, you can simply move the spring slightly over. I find moving it just this tiny bit makes a huge difference: [[File:SNESCartridgeSpring.jpg]]
[[File:SNESCartridgeSpring.jpg]]

Revision as of 04:25, 4 July 2022

If your cartridge lever is loose on your launch model SNES, you can take the console apart and move the bottom end of the spring into the hole on the left. This will add more tension on the spring and make the cartridge release lever much more firm.

SNESCartridgeSpring.jpg

Retrieved from "https://consolemods.org/wiki/index.php?title=SNES:Tightening_Cartridge_Lever&oldid=13887"