Vita:UDCD Video Streaming Plugin: Difference between revisions
(General cleanup) |
(Further cleanup) |
||
Line 1: | Line 1: | ||
[https://github.com/xerpi/vita-udcd-uvc The UDCD Video streaming plugin] is a kernel plugin that allows you to stream the Vita screen over a USB cable. The Vita appears as a USB class camera and is accessible from VLC and OBS on a PC or on any other device that supports the USB Video class (such as Androids). | |||
The plugin uses the SceUdcd module of the PSVita OS to setup the necessary USB descriptors to simulate and behave as an USB Video class device, similar to a webcam or a USB video capture card. The hardware color space converter of the PSVita's SoC is used to perform the conversion to the destination pixel format; then the USB controller directly performs a DMA transfer from the physical address of the resulting converted framebuffer, saving CPU usage and and reducing power consumption. | |||
{{Note|The plugin ''doesn't'' stream audio. For that, use a 3.5mm jack to jack adapter (a ferrite bead might help reduce the electromagnetic noise).}} | |||
The plugin | |||
== Supported Formats and Resolutions == | |||
== Supported | |||
* 960x544 @ 30 FPS and (less than) 60 FPS | * 960x544 @ 30 FPS and (less than) 60 FPS | ||
Line 17: | Line 14: | ||
== Download and installation == | == Download and installation == | ||
'''Download''': | '''Download''': | ||
* udcd_uvc.skprx - [https://github.com/xerpi/vita-udcd-uvc/releases GitHub releases page] | * udcd_uvc.skprx - [https://github.com/xerpi/vita-udcd-uvc/releases GitHub releases page] | ||
Line 29: | Line 26: | ||
# Copy <code>udcd_uvc.skprx</code> to your PSVita | # Copy <code>udcd_uvc.skprx</code> to your PSVita | ||
# Add <code>udcd_uvc.skprx</code> to taiHEN's config (<code>ur0:/tai/config.txt</code> or <code>ux0:/tai/config.txt</code>): | # Add <code>udcd_uvc.skprx</code> to taiHEN's config (<code>ur0:/tai/config.txt</code> or <code>ux0:/tai/config.txt</code>): | ||
#:<pre> | |||
< | #:: *KERNEL | ||
ur0:tai/udcd_uvc.skprx</ | #:: ur0:tai/udcd_uvc.skprx</pre> | ||
# Reboot your PSVita. | # Reboot your PSVita. | ||
== Troubleshooting == | == Troubleshooting == | ||
If the video looks glitched, try to change the video player configuration to use the | If the video looks glitched, try to change the video player configuration to use the NV12 format or switch to another player (like PotPlayer or OBS). If the colors look wrong, set color range to full and color space to BT.601 (Rec. 601). | ||
If you use Windows 10 you might have to change the Camera access permissions on the Privacy Settings. | If you use Windows 10 you might have to change the Camera access permissions on the Privacy Settings. | ||
On Linux | On Linux, try using ''mplayer'' (<code>mplayer tv:// -tv driver=v4l2:device=/dev/videoX:width=960:height=544</code>). | ||
'''Audio noise fix:''' | '''Audio noise fix:''' | ||
Line 46: | Line 42: | ||
* Disable USB power supply (Settings > System) | * Disable USB power supply (Settings > System) | ||
Note | {{Note|Remember that if anything goes wrong (like the Vita not booting), you can always press L at boot to skip plugin loading.}} | ||
== Turning the screen off during streaming == | == Turning the screen off during streaming == |
Revision as of 02:57, 8 August 2022
The UDCD Video streaming plugin is a kernel plugin that allows you to stream the Vita screen over a USB cable. The Vita appears as a USB class camera and is accessible from VLC and OBS on a PC or on any other device that supports the USB Video class (such as Androids).
The plugin uses the SceUdcd module of the PSVita OS to setup the necessary USB descriptors to simulate and behave as an USB Video class device, similar to a webcam or a USB video capture card. The hardware color space converter of the PSVita's SoC is used to perform the conversion to the destination pixel format; then the USB controller directly performs a DMA transfer from the physical address of the resulting converted framebuffer, saving CPU usage and and reducing power consumption.
The plugin doesn't stream audio. For that, use a 3.5mm jack to jack adapter (a ferrite bead might help reduce the electromagnetic noise). |
Supported Formats and Resolutions
- 960x544 @ 30 FPS and (less than) 60 FPS
- 896x504 @ 30 FPS and (almost) 60 FPS
- 864x488 @ 30 FPS and 60 FPS
- 480x272 @ 30 FPS and 60 FPS
- 1280x720 @ 30 FPS
Download and installation
Download:
- udcd_uvc.skprx - GitHub releases page
Compilation
- vitasdk is needed.
Installation:
- Copy
udcd_uvc.skprx
to your PSVita - Add
udcd_uvc.skprx
to taiHEN's config (ur0:/tai/config.txt
orux0:/tai/config.txt
):- *KERNEL
- ur0:tai/udcd_uvc.skprx
- Reboot your PSVita.
Troubleshooting
If the video looks glitched, try to change the video player configuration to use the NV12 format or switch to another player (like PotPlayer or OBS). If the colors look wrong, set color range to full and color space to BT.601 (Rec. 601).
If you use Windows 10 you might have to change the Camera access permissions on the Privacy Settings.
On Linux, try using mplayer (mplayer tv:// -tv driver=v4l2:device=/dev/videoX:width=960:height=544
).
Audio noise fix:
- Disable USB power supply (Settings > System)
Remember that if anything goes wrong (like the Vita not booting), you can always press L at boot to skip plugin loading. |
Turning the screen off during streaming
These 2 modified projects are not on GitHub and are quite hard to find. They are included in Autoplugin 2
- udcd_uvc OLED - For OLED screens model 1000 - Turns the screen black, turning it off
- udcd_uvc LCD - For LCD screens model 2000+ - Turns the screen off while streaming