Neo Geo:Chip Replacements: Difference between revisions
Jump to navigation
Jump to search
(Created page with "The NEO-BUF chip on some motherboards can go bad. There is a drop-in replacement for these chips found [https://www.tindie.com/products/furrtek/neo-buf-replacement/ on Tindie]. == Symptoms == * Random reboots during gameplay, particularly on a 161-in-1 cart. == Installation == # Remove the faulty NEO-BUF chip with hot air. # Remove the remaining solder on the PCB pads with solder braid if the surface isn't perfectly flat. # Clean up the eventual flux residue with IP...") |
mNo edit summary |
||
| Line 4: | Line 4: | ||
* Random reboots during gameplay, particularly on a 161-in-1 cart. | * Random reboots during gameplay, particularly on a 161-in-1 cart. | ||
* Green screen on boot, and it's not a calendar error. | |||
== Installation == | == Installation == | ||
Revision as of 12:24, 10 July 2023
The NEO-BUF chip on some motherboards can go bad. There is a drop-in replacement for these chips found on Tindie.
Symptoms
- Random reboots during gameplay, particularly on a 161-in-1 cart.
- Green screen on boot, and it's not a calendar error.
Installation
- Remove the faulty NEO-BUF chip with hot air.
- Remove the remaining solder on the PCB pads with solder braid if the surface isn't perfectly flat.
- Clean up the eventual flux residue with IPA.
- Place the NEO-BUF replacement board in the right orientation (see pin 1 mark), align it precisely, and solder the 4 corners using a generous amount of flux.
- Drag-solder all the sides or solder each pin individually. The small castellated contacts will "attract" solder by capillary action. Make sure none of the contacts are bridged.