CRT:PVM-1954Q: Difference between revisions
Jump to navigation
Jump to search
m (Text replacement - "{{unlabelled table warning}}↵↵{| class="wikitable"" to "{{unlabelled table warning}} {| class="wikitable sortable"") |
m (region variant name) |
||
Line 1: | Line 1: | ||
{{Infobox/CRT | {{Infobox/CRT | ||
|model = PVM-1954Q | |model = PVM-1954Q <br> PVM-2054QM | ||
|manufacturer = Sony | |manufacturer = Sony | ||
|type = Professional | |type = Professional |
Revision as of 13:55, 13 November 2023
PVM-1954Q
PVM-2054QM
PVM-2054QM
Information | ||
---|---|---|
Manufacturer | Sony | |
Type | Professional | |
Size | 19” | |
TV Lines | 600 | |
Dot Pitch | 0.4mm | |
Regions | NTSC, PAL, SECAM | |
240p/480i | Yes | |
480p | No | |
720p | No | |
1080i | No | |
Vsync | 50/60hz | |
Widescreen | No | |
Composite | 2x (Line A/B) | |
S-Video | 1x (Line C) | |
Component | 1x RGB/YPbPr | |
Dimensions | Width: 450mm
Depth: 503mm Height: 458mm | |
Weight | 66.1lb, 30kg | |
Firmware | Unknown | |
Links | ||
Operation Manual | PVM-1954Q Operation Manual | |
Brochure | PVM-1954Q Brochure |
Capacitors
Always replace capacitors with equal capacitance value and equal or greater voltage capacitors. Higher temperature ratings (105°C instead of 80°C, etc.) are preferable and will extend the life of the capacitors. |
Deflection Board (Recommended Replacements)
- Notes:
- SAVON PAT Capacitor Kit
Capacitor (C#) | Capacitance (uF) | Voltage (V) | Notes |
---|---|---|---|
206 | 100 | 25 | |
507 | 100 | 25 | |
522 | 100 or 2200 | 25 or 16 | 100uF/25V OR 2200uF/16V REPLACE WITH SAME VALUE |
523 | 1 | 50 | |
529 | 0.47 | 50 | REPLACE WITH 1uF/50V |
541 | 4.7 | 50 | REPLACE WITH 10uF/50V |
572 | 4.7 | 160 | REPLACE WITH 10uF/250V |
579 | 100 | 50 | |
584 | 2.2 | 160 | REPLACE WITH 4.7uF/250V |
585 | 4.7 | 160 | REPLACE WITH 10uF/250V |
588 | 10 | 50 | |
590 | 2.2 | 50 | REPLACE WITH 2.2uF/100V |
592 | 4.7 | 160 | REPLACE WITH 10uF/160V |
595 | 220 | 25 | |
596 | 100 | 25 | |
1504 | 10 | 50 |
Links
https://crtdatabase.com/crts/sony/sony-pvm-1954q
Media
Technical Bulletins
If you'd like to help out, please open each document below and edit the document's page to change "(unknown)" to a small description of what the bulletin is about.
When all of the documents are identified, please remove this warning.
When all of the documents are identified, please remove this warning.
File Name | Purpose |
---|---|
File:201996118.pdf | Technical Bulletin 96-118. Correcting Clicking Noise |
File:301994030.pdf | Technical Bulletin 94-030. Breakage Due to Use of Incorrect Packing Materials |
File:301994059.pdf | Technical Bulletin 94-059. Correcting Phase Adjustment |
File:301995067.pdf | Technical Bulletin 95-067. Inoperative 3200K Switch |
File:301996160.pdf | Technical Bulletin 96-160.
3-Pin Connector Supplied. |
File:301998105.pdf | Technical Bulletin 1998-105. Change of Repair Parts, Top Cover |
File:301998123.pdf | Technical Bulletin 1998-123.
Picture Does Not Appear When SDI is Input |
File:301998261.pdf | Technical Bulletin 1998-261R2.
Preventing Picture Distortion |
File:302008027.pdf | Technical Bulletin 30-2008-027
Reuse parts when replacing the A board. |