Xbox 360:Exploit Chart

The following chart shows all compatible hacks for each console.

Exploit	Xenon	Zephyr	Falcon/Opus	Jasper	Tonasket	Trinity	Corona	Winchester
JTAG	✔️2	✔️2	✔️2	✔️2	❌	❌	❌	❌1
R-JTAG	➖3	➖3	✔️	✔️	✔️	❌	❌	❌1
R-JTOP	➖3	➖3	✔️	✔️	✔️	❌	❌	❌1
RGH1	➖3	➖3	✔️	✔️	✔️	❌	❌	❌1
RGH1.2	➖3	➖3	✔️	✔️	✔️	✔️7	✔️7	❌1
RGH2	❌5	➖6	➖6	➖6	➖6	✔️	✔️	❌1
S-RGH	❌5	➖4	➖4	➖6	➖6	✔️	✔️	❌1
Mufas	❌	❌	❌	❌	❌	✔️	✔️	❌1
EXT_CLK	✔️	✔️	TBD	TBD	TBD	TBD	TBD	❌1
RGH3	❌	❌	✔️8	✔️8	✔️8	✔️7	✔️7	❌1

¹ Winchester consoles cannot be RGH'd or JTAG'd

² Must check CB via NAND dump to see if it is JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.

³ Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion. R-JTAG requires dashboard 14719, and R-JTOP requires dashboard 15572.

⁴ Hangs for unknown reason.

⁵ RGH2 and S-RGH requires the HANA chip, which is not present on Xenon.

⁶ Unreliable due to requirement of long wires.

⁷ Requires scraping solder mask off of PLL point (more difficult).

⁸ Often works, but is more likely to have issues compared to if it's done on Trinity/Corona. On the other hand, RGH 1.2 has a much more guaranteed success rate on these motherboards.

Legend

Status	Color & Symbol
Reliable	✔️
Unreliable	➖
Impossible	❌
To be determined	TBD