Xbox 360:Alternate Solder Points: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
m (Kitty cat)
Line 1: Line 1:
[[Category:Xbox360]]
== Phat ==
== Phat ==


Revision as of 10:38, 14 August 2024

Phat

3.3v, 5v, GND, and RGH 2 i2C

  • J2B1
    • J2B1.png

1.8V (Only if using an X360 ACE V1/V2/V3)

  • Non-Xenon
    • 1v8-HDMI.png
  • Xenon
    • 1v8-Xenon.png
PLL Repair on a Phat motherboard (required if bottom pad is damaged). Image credit to TheLazyITGuy.

CPU_RST

  • C7R112
    • RST.png
  • R8C2
    • VXi9LgC.jpg
  • J8C1
    • Will not work with EXT_CLK.
    • Cp2OBF3.jpeg

EXT_CLK

  • Bottom (Under CPU)
    • EXT CLK.png

FT6U1 POST (RGH 1.2 or EXT_CLK)

  • Bottom
    • Post.png
  • Top (requires scraping)
    • FT6U1 topside.png

FT6U7 POST (RGH 1, 2, or 3)

  • Bottom
    • WEFEjMr.jpg
  • Top (requires scraping)
    • (requires scraping)

GND

PLL

  • Bottom
    • Fat360PLL.jpg
  • Top (under CPU heatsink; requires scraping)
    • Fat360topPLL.jpg

STBY_CLK

  • Top (Xenon)
    • STBY CLK-Xenon.png
  • Top (Non-Xenon)
    • Fat360STBY CLK.jpg
    • There are 2 points boxed; either can be used.
  • Bottom (Non-Xenon)
    • CLK.png

SMC

  • POST and PLL (Bottom)
    • PhatRGH3SMC.png
    • Alternative SMC_PLL (Top)
      • Topsidepoint.png

Trinity

3.3v, 5v, GND, and RGH 2 i2C

  • J2C3
    • J2C3Trinity.png

CPU_CLK (Only if using an X360 ACE V4/V5)

  • Top (HANA)
    • TrinityC1C2.png
    • There are two points circled for C1 and C2 respectively; either can be used or bridged.
  • Bottom
    • TrinityBottomC1C2.png

PLL

  • Bottom
    • RGH1.2 Slim PLL.jpg
    • No alternative point!

POST & RST

  • Bottom
    • TrinityPOSTandRST.png
    • There are two RST points, either can be used.
  • Top (without postfix adapter)
    • CoronaTrinityPOST.png
  • Top (with postfix Adapter)
    • PostfixadapterV1 example.gif
    • A Postfix adapter can be used on Trinity in case the POST point is damaged.

STBY_CLK

  • C3B10 (Top)
    • TrinityHanaCLK.jpg
  • FT3N2 (Bottom)
    • Ft3n2.jpg

SMC

  • SMC_PLL is also used for Muffin/Mufas
  • SMC_PLL
    • Bottom
      • FT2V1
    • Top
      • Trinity smcpll.jpg
  • SMC_POST
    • Bottom
      • R3R22

Corona/Waitsburg/Stingray

3.3v, 5v, GND, and RGH 2 i2C

  • J2C3
    • J2C3Corona.png

CPU_CLK (Only if using an X360 ACE V4/V5)

  • Top
    • CoronaCPUCLK.png
  • There are two points circled for C1 and C2 respectively, either can be used or bridged.

PLL

  • Bottom
    • RGH1.2 Slim PLL.jpg
    • No alternative point!

POST & RST

  • Bottom
    • Corona POSTandRST.png
    • There are two RST points; either can be used.
  • Top (without postfix adapter)
    • CoronaTrinityPOST.png
  • Top (Postfix Adapter)
    • PostfixadapterV1 example.gif
    • If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.

SMC

  • The GPIO used for SMC_PLL is also used for Muffin/Mufas
  • POST and PLL (Bottom)
    • SMC_POST and SMC_PLL
  • Alternate SMC_PLL (Top, Southbridge)
    • Coronasmcpost.jpg
  • Alternate SMC_PLL (Top, DB2G3)
    • CoronaDB2G3.png

Postfix Adapter Installation & Identification Guide

  • Full Postfix Guide.png
Retrieved from "https://consolemods.org/wiki/index.php?title=Xbox_360:Alternate_Solder_Points&oldid=46902"