AV:COMP2DVI: Difference between revisions

From ConsoleMods Wiki
Jump to navigation Jump to search
No edit summary
m (Derf moved page AV:COMP2DVI to AV:COMP2DVI)
 

Latest revision as of 17:42, 3 July 2022

The COMP2DVI takes an analog component YPbPr input and routes the signal to the analog pins of a DVI connector. The Comp Cleaner is an open-source (CERN OHLv2) device, designed to filter 240p - 1080i YPbPr component video signals for use with digital devices, such as flat-screen TV's and capture cards. This will allow more flexibility to your setup, depending on your target capture card or device.

The source gerbers, as well as the Eagle design files, can be downloaded here:

DIP Switch Settings

The settings are printed on the back of the PCB, but can be referenced here:
Comp2DVIv2DIP-300x240.jpg

DVI-I Cable / Connector

This can connect to your capture card via a DVI-I or DVI-A cable or coupler. Ensure your DVI cable you are using has the analog pins, otherwise it won't work!

Full Bill Of Materials

https://github.com/retrorgb/COMP2DVI/blob/master/COMP2DVI\_BOM.xlsx