Xbox 360:Exploit Chart: Difference between revisions
No edit summary |
(Fix.) |
||
| Line 96: | Line 96: | ||
| RGH2 | | RGH2 | ||
| [[#impossible|❌5]] | | [[#impossible|❌5]] | ||
| [[# | | [[#unreliable|➖6]] | ||
| [[# | | [[#unreliable|➖6]] | ||
| [[# | | [[#unreliable|➖6]] | ||
| [[#reliable|✔️]] | | [[#reliable|✔️]] | ||
| [[#reliable|✔️]] | | [[#reliable|✔️]] | ||
| Line 104: | Line 104: | ||
|- | |- | ||
| S-RGH | | S-RGH | ||
| [[#impossible| | | [[#impossible|❌5]] | ||
| [[#unreliable|➖4]] | | [[#unreliable|➖4]] | ||
| [[#unreliable|➖4]] | | [[#unreliable|➖4]] | ||
| Line 138: | Line 138: | ||
| [[#impossible|❌]] | | [[#impossible|❌]] | ||
| [[#impossible|❌]] | | [[#impossible|❌]] | ||
|- | |||
| EXT_CLK | |||
| [[#reliable|✔️]] | |||
| [[#reliable|✔️]] | |||
| TBD | |||
| TBD | |||
| TBD | |||
| TBD | |||
| TBD | |||
|} | |} | ||
| Line 150: | Line 159: | ||
<sup>5</sup> RGH2 requires HANA chip, which is not present on Xenon. | <sup>5</sup> RGH2 requires HANA chip, which is not present on Xenon. | ||
<sup>6</sup> | <sup>6</sup> Unreliable due to requirement of long wires. | ||
<sup>7</sup> Requires scraping solder mask off of point (more difficult). | <sup>7</sup> Requires scraping solder mask off of point (more difficult). | ||
Revision as of 20:16, 18 September 2022
Recommended Exploit Chart
The below chart highlights the recommended hack to use on each console.
| Dashboard | Xenon | Zephyr | Falcon1 | Jasper | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|
| ≤73712 | JTAG | JTAG | JTAG | JTAG | N/A | N/A | N/A |
| ≤14699 | EXT_CLK3 | EXT_CLK | RGH1 | RGH1 | RGH34, 5 | RGH34, 5 | N/A |
| >146994 | EXT_CLK3 | EXT_CLK | RGH1.2 | RGH1.2 | RGH35 | RGH35 | N/A |
1 Opus motherboards are Falcon motherboards without HDMI
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB.
3 RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.
4 Update to latest dashboard prior to RGH.
5 Requires scraping solder mask off of point (more difficult).
Full Exploit Compatibility Chart
The below chart shows all compatible hacks for each console.
| Exploit | Xenon | Zephyr | Falcon1 | Jasper | Trinity | Corona | Winchester |
|---|---|---|---|---|---|---|---|
| JTAG | ✔️2 | ✔️2 | ✔️2 | ✔️2 | ❌ | ❌ | ❌ |
| RGH1 | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
| RGH1.2 | ➖3 | ➖3 | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌ |
| RGH2 | ❌5 | ➖6 | ➖6 | ➖6 | ✔️ | ✔️ | ❌ |
| S-RGH | ❌5 | ➖4 | ➖4 | ➖6 | ✔️ | ✔️ | ❌ |
| RGH3 | ❌ | ❌ | ✔️ | ✔️ | ✔️7 | ✔️7 | ❌ |
| R-JTAG | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
| R-JTOP | ➖3 | ➖3 | ✔️ | ✔️ | ❌ | ❌ | ❌ |
| EXT_CLK | ✔️ | ✔️ | TBD | TBD | TBD | TBD | TBD |
1 Opus motherboards are Falcon motherboards without HDMI
2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.
3 Only works on some boards and can take minutes to boot - some randomly crash on PLL de-assertion.
4 Hangs for unknown reason.
5 RGH2 requires HANA chip, which is not present on Xenon.
6 Unreliable due to requirement of long wires.
7 Requires scraping solder mask off of point (more difficult).
| Legend |
|---|
| Reliable ✔️ |
| Unreliable ➖ |
| Impossible ❌ |