Atari 5200:Connector Pinouts: Difference between revisions
m (→Cartridge Port) |
|||
Line 24: | Line 24: | ||
| 10 || Y2 (Cartridge Address 2) | | 10 || Y2 (Cartridge Address 2) | ||
|- | |- | ||
| 11 || Not Connected | | 11 || Not Connected (4-port) / Unregulated Input Voltage (2-port) | ||
|- | |- | ||
| 12 || Ground | | 12 || Ground |
Revision as of 08:25, 19 March 2023
Cartridge Port
Note: Pins 1 through 18 are at the front and numbered from left to right. Pins 19 through 36 are at the back and numbered from right to left.
Pin # | Description |
---|---|
1 | D0 |
2 | D1 |
3 | D2 |
4 | D3 |
5 | D4 |
6 | D5 |
7 | D6 |
8 | D7 |
9 | Y1 (Cartridge Address 1) |
10 | Y2 (Cartridge Address 2) |
11 | Not Connected (4-port) / Unregulated Input Voltage (2-port) |
12 | Ground |
13 | Ground |
14 | Ground |
15 | A6 |
16 | A5 |
17 | A2 |
18 | V |
19 | A0 |
20 | A1 |
21 | A3 |
22 | A4 |
23 | Shield Ground |
24 | Ground (4-port) / Video In (2-port) |
25 | Ground |
26 | 5V |
27 | A7 |
28 | Not Connected |
29 | A8 |
30 | Not Connected (4-port) / Audio In (2-port) |
31 | A9 |
32 | A13 |
33 | A10 |
34 | A12 |
35 | A11 |
36 | Cartridge Interlock |
Pins 9 and 10 provide access to memory ranges $8000 to $BFFF and $4000 to $7FFF, respectively. Pins 18 and 36 act as a cartridge interlock to prevent the console from applying power to a cartridge which is not properly connected. When these two pins are shorted together, they provide 5V to the cartridge and allow the 5200 to boot.
Controller Port
Note: Female is connector at the console. Male is connector at the controller. Diagram pictured is of the connector at the controller end.
Pin # | Description | Wire Color |
---|---|---|
1 | Column Data (Right Keypad Column) | Gray |
2 | Column Data (Middle Keypad Column) | White |
3 | Column Data (Left Keypad Column) | Black and White |
4 | Auxiliary Keypad Row | Orange and White |
5 | Row Data (Keypad Row 3) | Blue |
6 | Row Data (Keypad Row 2) | Violet |
7 | Row Data (Keypad Row 1) | Red and White |
8 | Row Data (Keypad Row 4) | Green |
9 | Potentiometer Voltage (+CAV) | Black |
10 | Potentiometer X Axis | Brown |
11 | Potentiometer Y Axis | Red |
12 | Unused | N/A |
13 | Bottom Fire Button | Yellow |
14 | Top Fire Button | Green and White |
15 | Ground | Orange |
Expansion Port
Note: Pins 1 through 18 are at the top and numbered from left to right. Pins 19 through 36 are at the bottom and numbered from right to left.
Pin # | Description |
---|---|
1 | 5V (VCC) |
2 | Not Connected (4-port) / Audio Out (2-port) |
3 | Ground |
4 | WE (Write Enable) |
5 | CS0 |
6 | D6 |
7 | D4 |
8 | D2 |
9 | D0 |
10 | IRQ |
11 | Ground |
12 | Data In |
13 | Clock In |
14 | Clock Out |
15 | Data Out |
16 | Audio Input |
17 | A14 |
18 | System Clock |
19 | A11 |
20 | A7 |
21 | A6 |
22 | A5 |
23 | A4 |
24 | A3 |
25 | A2 |
26 | A1 |
27 | A0 |
28 | Ground |
29 | D1 |
30 | D3 |
31 | D5 |
32 | D7 |
33 | Not Connected |
34 | Ground |
35 | Not Connected |
36 | 5V (VCC) |