GameCube:Connector Pinouts
Jump to navigation
Jump to search
GameCube Controller Connector Pinout
| Pin # | Color | J1 | Function |
|---|---|---|---|
| 1 | Yellow | 2 | 5V Power Supply (used by rumble motor) |
| 2 | Red | 3 | DATA line: bi-directional data to/from console, pull up to 3.43V |
| 3 | Green | 4 | Ground |
| 4 | White | 5 | Ground (Extrme Skillz GC to USB interface has pins 3+4 wired as common ground) |
| 5 | - | - | Unknown |
| 6 | Blue | 1 | 3.43V logic supply |
| 7 | Black | 6 | Cable shielding / ground. Usually the same ground of pin 3. |
GameCube AV Connector Pinout
Note: Female is connector at the video cable. Male is connector at the console.
| Pin # | Name | Description |
|---|---|---|
| 1 | R | R |
| 2 | G | G |
| 3 | C-Sync | Composite Sync
Replaced by +12V on PAL SNES and PAL Gamecube consoles But not the PAL N64 |
| 4 | B | B |
| 5 | GND | Ground |
| 6 | GND | Ground |
| 7 | Y | S-Video Y (Luminance) |
| 8 | C | S-Video C (Chrominance) |
| 9 | CVBS | Composite Video |
| 10 | +5V | +5 VDC |
| 11 | L+R | Left+Right Audio (Mono) |
| 12 | L-R | Left-Right Audio (Used to calculate Stereo) |
