CRT:FDM-030
| Information | |
|---|---|
| Manufacturer | Sony |
| Type | Consumer/Industrial |
| Size | 3", 2.7" visible |
| Regions | EIA+CCIR |
| 240p/480i | Yes |
| 480p | No |
| Vsync | 50/60 Hz |
| Widescreen | No |
| Composite | 1x (BNC) |
| Audio Input | 1x (3.5 mm minijack) |
| Links | |
| Remote | No |
The Sony FDM-030 is a handheld video monitor which found a large market among CCTV installers. As the name implies, however, it was primarily designed for consumer use, being also available in bundle with a camera.
As prominently advertised, it supports both EIA/NTSC (480i/60) and CCIR (576i/50) video modes.
It is powered with 6 V, using either 4 AA batteries or a 5.5/2.1 mm barrel jack (positive ground).
Like most classic Watchmen, it uses a sideways tube, the JM03 (which unlike the JM02 and JM04 has the high voltage connected via a regular base pin instead of the customary "ultor" anode connector). On the outside it mostly resembles the CRT:FD-10, although the internals are significantly different.
External controls: Power, volume, focus (unmarked, on bottom).