CRT:PVM-20L5
Jump to navigation
Jump to search
PVM-20L5
| Information | ||
|---|---|---|
| Manufacturer | Sony | |
| Type | Professional | |
| Size | 20" | |
| TV Lines | 800 (4:3), 600 (16:9) | |
| Dot Pitch | 0.31mm | |
| Regions | NTSC, PAL, SECAM | |
| 240p/480i | Yes | |
| 480p | Yes | |
| 720p | Yes | |
| 1080i | Yes | |
| Vsync | 50/60hz | |
| Widescreen | No | |
| Composite | 2x (Line A/B) | |
| S-Video | 1x (Line A) | |
| Component | 1x RGB/YPbPr | |
| SDI | 0 | |
| HD-SDI | 0 | |
| Dimensions | Width: 452mm
Depth: 500mm Height: 414mm | |
| Weight | 68 lb, 5 oz | |
| Firmware | Unknown | |
| Links | ||
| Standard Boards | None | |
| Optional Boards | CRT:BKM-120D
CRT:BKM-129X CRT:BKM-142HD CRT:BKM-150CP CRT:BKM-155DV |
|
| Operation Manual | PVM L5 Series Manual | |
| Service Manual | PVM L5 Series Manual | |
| Brochure | PVM L5 Series Brochure | |
Parts and Accessories
- The 20L5 supports rather rare input board for RGB/YPbPr inputs: the BKM-129X.It is recommended to instead get Martin Hejnfelt's BKM-129X clone US Retialer UK Retailer (source files) as it is a cheap way to add scart and VGA inputs (though RGB/YPbPr BNC inputs are built in).
- User mikaeltarquin created a replacement 3D print of the power button over on thingiverse. This part is often is lost or broken.
Media
Technical Bulletins
If you'd like to help out, please open each document below and edit the document's page to change "(unknown)" to a small description of what the bulletin is about.
When all of the documents are identified, please remove this warning.
When all of the documents are identified, please remove this warning.
| File Name | Purpose |
|---|---|
| File:202005042.pdf | REPLACE H. CENT COIL |
| File:202005184.pdf | BKM-143HS SUPPORT |
| File:302002134.pdf | Video or raster doesn’t appear |
| File:302002174.pdf | Fix: The unit may not power-on if the +5V bus for the CPU and signal circuit does not start. |
| File:302002239.pdf | MANUAL CORRECTION—G2 ADJUSTMENT |
| File:302003003.pdf | PREVENTINGCAPACITOROND1BOARDFROM TOUCHING REAR BRACKET |
| File:302003004.pdf | Firmware Error on M-Board causes video fault with SDI on a BKM-150CP. |
| File:302003138.pdf | READJUSTMENT OF DEFLECTION CIRCUIT (1080/48i) |
| File:302003149.pdf | DAMAGE TO VIDEO OUPUT IC |
| File:302003164.pdf | Compatibility listing of B, T and M Board combinations. |
| File:302003181.pdf | HOW TO MAKE FORMER/NEW G AND D1 BOARDS COMPATIBLE |
| File:302003186.pdf | Restoring compatibility between older/newer T and Q boards |
| File:302003188.pdf | Fix: No/dark picture - heater IC may be damaged. |
| File:302004004.pdf | RETRACE LINE ON SCREEN WITH NO HD-SDI INPUT |
| File:302004039.pdf | Fix: The monitor may not power-on if a component part on the G board (such as Q606, Q617, Q618, IC602) fails. |
| File:302004076.pdf | MANUAL CORRECTION—G2 ADJUSTMENT AND WHITE BALANCE ADJUSTMENT (15k) AND (33k) |
| File:302004080.pdf | Information about incomplete white balance adjustment after replacing the CRT |
| File:302004096.pdf | DAMAGE TO VIDEO OUTPUT IC |
| File:302004129.pdf | WHITE BALANCE ADJUSTMENT FOR MZ CRT |
| File:302004134.pdf | HORIZONTAL LINEARITY |
| File:302008089.pdf | PICTURESHAKESHORIZONTALLYWHEN UNDER-SCANNED |
| File:302008092.pdf | V JITTER |
| File:302008106.pdf | MANUAL CORRECTION—C632 ON G BOARD |
| File:302009041.pdf | DAMAGE TO VIDEO OUTPUT IC |
| File:302009150.pdf | Parts registration: Brackets and tightening band holder |