CRT:BVM-14M4DE
Jump to navigation
Jump to search
Technical Bulletins
If you'd like to help out, please open each document below and edit the document's page to change "(unknown)" to a small description of what the bulletin is about.
When all of the documents are identified, please remove this warning.
When all of the documents are identified, please remove this warning.
| File Name | Purpose |
|---|---|
| File:201995140.pdf | PHASE SHIFT AT SDI INPUT |
| File:201996113.pdf | NOTES ON INSTALLING INPUT ADAPTER |
| File:201996165.pdf | Fix: White balance changes when scan size is switched |
| File:201996183.pdf | 16:9 MASK INSTALLATION |
| File:201996194.pdf | Fix: No power, front 3 LEDs blinking |
| File:201996195.pdf | Fix: Over voltage protection at power on (front 3 LEDs slowly blinking) |
| File:201996230.pdf | Fix: Extending H SIZE causes the image to twist |
| File:201997120.pdf | USER’S MAINTENANCE PASSWORD |
| File:201998035.pdf | Technical Bulletin: Firmware 1.21 changelog |
| File:201998229.pdf | Instructions for firmware update via PCMIA card |
| File:201998289.pdf | Firmware 1.31 changelog |
| File:201998292.pdf | Fix: Oscillation in high temperatures |
| File:201999027.pdf | PA BOARD REPLACEMENT |
| File:201999033.pdf | Fix: Ringing at top of picture |
| File:201999106.pdf | Firmware 1.33 changelog |
| File:201999170.pdf | SOFTWARE UPGRADE—VERSION 1.02 |
| File:201999274.pdf | Firmware 1.34 changelog |
| File:202000090.pdf | SOFTWARE UPGRADE—VERSION 1.03 |
| File:202000098.pdf | ENHANCING EA BOARD RELIABILITY |
| File:202001214.pdf | New BKM-21D option board |
| File:202001218.pdf | LOSS OF SDI SIGNAL W/B, COMPONENT SIGNAL SHADING |
| File:202001222.pdf | PART REGISTRATION—POWER THERMISTOR |
| File:202001230.pdf | Fix: No output of built-in test signals |
| File:202001236.pdf | Firmware 1.40 changelog (most recent version) |
| File:202002032.pdf | SOFTWARE UPGRADE—VERSION 1.10 |
| File:202002306.pdf | Service manual correction - part number for IC1 |
| File:202003002.pdf | MANUAL CORRECTION—COLOR TEMP ADJ MENU
|
| File:202003092.pdf | Replacing GC board |
| File:202003143.pdf | REUSE IC1 WHEN REPLACING GA BOARD |
| File:202003145.pdf | REUSE IC1 WHEN REPLACING GA BOARD |
| File:202003212.pdf | CHANGE IN CRT HEATER IMPEDANCE |
| File:202003245.pdf | REUSE IC3 WHEN REPLACING HZ BOARD |
| File:202004002.pdf | SCREEN FLICKERS WHEN GRAY SIGNAL IS INPUT |
| File:202004003.pdf | Parts registration - BC board |
| File:202004086.pdf | REUSE IC WHEN REPLACING HZ BOARD |
| File:202004091.pdf | PARTS REGISTRATION—IC SBX-1602B-21 REPLACES IC SBX-1602A |
| File:202004108.pdf | Caution when installing or removing option boards |
| File:202004253.pdf | Service manual correction - part number for +PS 5x14 |
| File:202005002.pdf | Fix: Closed caption characters jitter |
| File:202005008.pdf | Parts registration - Handle assembly |
| File:202005040.pdf | PARTSREGISTRATION—GBOARDSHIELD PLATE |
| File:202005083.pdf | REUSE PARTS WHEN REPLACING BK BOARD |
| File:202010127.pdf | Service manual correction - part number for BK Board |
| File:301998241.pdf | Instructions for firmware update via PCMIA card |
| File:301998261.pdf | Technical Bulletin 1998-261R2.
Preventing Picture Distortion |
| File:301999205.pdf | SOFTWARE UPGRADE—VERSION 1.02 |
| File:302001017.pdf | Technical Bulletin: CHANGE OF VOLTAGE RATING OF DAMPER DIODE |
| File:302001150.pdf | Technical Bulletin: PICTURE DISTORTION |
| File:302001151.pdf | Fix: No power on |
| File:302002114.pdf | PARTSREGISTRATIONANDMANUAL CORRECTION—BEZEL ASSEMBLY |
| File:302003133.pdf | Technical Bulletin: PICTURE DISTORTION AFTER POWERING ON OR SWITCHING MODES |
| File:302004058.pdf | Technical Bulletin: FLASHING CRT |
| File:302005143.pdf | REUSE PARTS WHEN REPLACING EA BOARD |
| File:302008034.pdf | REUSETRANSFORMERSWHENREPLACING GA BOARD |