Xbox 360:Alternate Solder Points
Jump to navigation
Jump to search
Phat
3.3v
1.8V (Only if using an X360 ACE)
Non-Xenon
Xenon
PLL
Bottom
Top (under CPU heatsink; requires scraping)
STBY_CLK
Top (Non-Xenon)
- There are 2 points boxed; either can be used.
Top (Xenon)
Bottom
POST
Bottom
Top (requires scraping)
CPU_RST
R8C2
C7R112
J8C1:
GND
J2B1 Header
AV Port
Any other ground point
Slim (Trinity)
PLL
No alternative point!
CPU_CLK (Only if using an X360 ACE V4/V5)
Top
- There are two points circled for C1 and C2 respectively; either can be used or bridged.
Bottom
POST & RST
- There are two RST points, either can be used.
- A Postfix adapter can be used on Trinity in case it's damaged.
STBY_CLK
C3B10 (Top)
FT3N2 (Bottom)
GND & 3.3V
J2C3
Slim or E (Corona/Waitsburg/Stingray)
File:5lY3TID.png
Postfix adapter installation guide
PLL
- No alternative point!
CPU_CLK (Only if using an X360 ACE V4/V5)
- There are two points circled for C1 and C2 respectively, either can be used or bridged.
POST & RST
- There are two RST points; either can be used.
- If POST on the bottom is disabled (like in Waitsburg & Stingray boards) or damaged, a postfix adapter is required.
