Xbox:Xecuter 2.6

From ConsoleMods Wiki
Revision as of 05:54, 11 January 2021 by Derf (talk | contribs)
Jump to navigation Jump to search
Exclamation-triangle-fill.svgThis process is dangerous and potentially can brick or fry your Xbox. It involves soldering a very small contact, so it is recommended to be experienced with soldering before proceeding.


Xecuter 2.6 Features:

  • Purple board color
  • 1MB flash ROM; can set up as 1x1024k or 2x512k
  • Comes with simple to connect switch bank with 3 switches: On-Off - Flash Protect - Bios Select
  • Can easily be switched off to allow XBOX live to work correctly
  • Cool blue LED's
  • All Backups of XBOX games or imports will boot flawlessly without any patches
  • Works on all models
  • Compatible with CDR/CDRW/DVDR/DVDRW
  • Can use cheap unbranded general purpose DVDR media
  • Universal design that works on all models from all regions (USA/JAP/PAL)
  • Macrovision Removed
  • Compatible with Xapt3r solderless install module

Xecture 2.6CE Additional Features:

  • White and red board color with curved section cutout
  • Alternating 5V connector which prevents the modchip from always being on when the Xbox is off in version 1.6 Xboxes
  • XLCD connector is a right angle instead of straight

___

Full Installation Guide - Same guide for Xecuter 3; only difference is that the external switch will be different

Recommended Switch Location