CRT:PVM-1954Q
Jump to navigation
Jump to search
PVM-1954Q
PVM-2054QM
PVM-2054QM
| Information | ||
|---|---|---|
| Manufacturer | Sony | |
| Type | Professional | |
| Size | 19” | |
| TV Lines | 600 | |
| Dot Pitch | 0.4mm | |
| Regions | NTSC, PAL, SECAM | |
| 240p/480i | Yes | |
| 480p | No | |
| 720p | No | |
| 1080i | No | |
| Vsync | 50/60hz | |
| Widescreen | No | |
| Composite | 2x (Line A/B) | |
| S-Video | 1x (Line C) | |
| Component | 1x RGB/YPbPr | |
| Dimensions | Width: 450mm
Depth: 503mm Height: 458mm | |
| Weight | 66.1lb, 30kg | |
| Firmware | Unknown | |
| Links | ||
| Operation Manual | PVM-1954Q Operation Manual | |
| Brochure | PVM-1954Q Brochure | |
Capacitors
 | Always replace capacitors with equal capacitance value and equal or greater voltage capacitors. Higher temperature ratings (105°C instead of 80°C, etc.) are preferable and will extend the life of the capacitors. |
Deflection Board (Recommended Replacements)
- Notes:
- SAVON PAT Capacitor Kit
| Capacitor (C#) | Capacitance (uF) | Voltage (V) | Notes |
|---|---|---|---|
| 206 | 100 | 25 | |
| 507 | 100 | 25 | |
| 522 | 100 or 2200 | 25 or 16 | 100uF/25V OR 2200uF/16V REPLACE WITH SAME VALUE |
| 523 | 1 | 50 | |
| 529 | 0.47 | 50 | REPLACE WITH 1uF/50V |
| 541 | 4.7 | 50 | REPLACE WITH 10uF/50V |
| 572 | 4.7 | 160 | REPLACE WITH 10uF/250V |
| 579 | 100 | 50 | |
| 584 | 2.2 | 160 | REPLACE WITH 4.7uF/250V |
| 585 | 4.7 | 160 | REPLACE WITH 10uF/250V |
| 588 | 10 | 50 | |
| 590 | 2.2 | 50 | REPLACE WITH 2.2uF/100V |
| 592 | 4.7 | 160 | REPLACE WITH 10uF/160V |
| 595 | 220 | 25 | |
| 596 | 100 | 25 | |
| 1504 | 10 | 50 |
Links
https://crtdatabase.com/crts/sony/sony-pvm-1954q
Media
Technical Bulletins
If you'd like to help out, please open each document below and edit the document's page to change "(unknown)" to a small description of what the bulletin is about.
When all of the documents are identified, please remove this warning.
When all of the documents are identified, please remove this warning.
| File Name | Purpose |
|---|---|
| File:201996118.pdf | Technical Bulletin 96-118. Correcting Clicking Noise |
| File:301994030.pdf | Technical Bulletin 94-030. Breakage Due to Use of Incorrect Packing Materials |
| File:301994059.pdf | Technical Bulletin 94-059. Correcting Phase Adjustment |
| File:301995067.pdf | Technical Bulletin 95-067. Inoperative 3200K Switch |
| File:301996160.pdf | Technical Bulletin 96-160.
3-Pin Connector Supplied. |
| File:301998105.pdf | Technical Bulletin 1998-105. Change of Repair Parts, Top Cover |
| File:301998123.pdf | Technical Bulletin 1998-123.
Picture Does Not Appear When SDI is Input |
| File:301998261.pdf | Technical Bulletin 1998-261R2.
Preventing Picture Distortion |
| File:302008027.pdf | Technical Bulletin 30-2008-027
Reuse parts when replacing the A board. |