Vita:USB-C Mod

The Vita uses a proprietary connector for it's power cable. If you ever lose the original charger or break this port, you have the option to replace it with a USB-C port. This page was created mostly from this guide by /u/purekimwater.

Installation

PCH-1000

The 1000 models have drop-in USB-C replacement boards, such as the ones available from OxyllMods. Simply desolder the old power jack, and solder in the new one. You may need to dremel the shell plastic a bit to fit the USB-C port.

STL files for the USB-C bezel created by oxyll are available File:VitaC bezel.zip.

PCH-2000

Completed USB-C mod

You can purchase a generic USB-C breakout board such as this one, this one, or this one. Ensure that you purchase one with two resistors on the board.

1. Disassemble your console and desolder the old power jack.
2. Solder wires to the power jack pads and the USB-C PCB. //// Diagrams here

1. Use 3M double sided foam tape to mount the port in place.