Export translations

Settings

Group

Language

Format

Export for off-line translation

Export in native format

Export in CSV format

<languages/><div lang="en" dir="ltr" class="mw-content-ltr">
[[File:RetroTINK2022Lineup-1024x415.jpg]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==RetroTINK-2X Family==
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
===2X Upscalers===
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The RetroTINK-2X line of products are zero-lag, 480p HDMI line doublers for retro game consoles. Here's the different models available:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
'''RetroTINK-2X Mini:''' An entry-level scaler;  supporting composite and S-Video inputs.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
'''RetroTINK-2X Pro:''' An updated version of the original 2X with more features, including scanlines.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
'''RetroTINK-2X SCART:''' A simple RGB SCART line doubler that outputs 480p HDMI:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
'''''Discontinued''''' '''RetroTINK-2X Multiformat'''. No longer supported by RetroTINK LLC / Mike Chi. Unsupported Firmware upgrades can be found here: [[AV:RetroTINK-2X_Family/2x_multiformat|2X Multiformat Firmware Wiki]]<br>
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The RetroTINK-2X Multiformat 1.0 Manual can be downloaded [https://consolemods.org/wiki/images/b/b8/RetroTINK_2X-M_PRO_Multiformat_Manual.pdf Here].
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
'''''Discontinued''''' Original RetroTINK-2X
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 2X Video Product Launches / Reviews ====
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Reviews and Video Explanations of the RetroTINK 2X products:
{| class="wikitable" 
|-
! {{#ev:youtube|https://www.youtube.com/watch?v=16z_C7-Gom4&t=208s}}
RetroTINK-2X Mini
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
! {{#ev:youtube|https://youtu.be/nwNrqIjxBaA}}
RetroTINK-5X Launch Video
|-
! {{#ev:youtube|https://youtu.be/e6GFw-6ypLM}}
RetroTINK-5X 2.0 Firmware Launch
! {{#ev:youtube|https://youtu.be/Fl75ou-8O00}}
RetroTINK-2X SCART
|-
! {{#ev:youtube|https://youtu.be/pdIgmQH4AHA}}
RetroTINK-2X Classic (discontinued)
| 
|}
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
====RetroTINK-2X Classic 3d Printed Case====
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
[[File:RetroTINK2X3DPrintCase-300x233.jpg|300px]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The RetroTINK-2X (discontinued) is barebone and the look doesn't appeal to everyone. A custom case for the RetroTINK-2X Classic has been created as an alternative by [https://www.laserbear.net/ Laser Bear Industries].
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Download the 3D-Printable Files Here:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
[[File:RetroTINK2xCase.zip]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
As an FYI, all of Greg's designs can be purchased from his web store here:  
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The RetroTINK-2X Case consists of a few 3d Printed parts:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
RetroTINK Bottom V1.4.stl
 RetroTINK Top V1.4.stl
 RetroTINK Buttom.stl (print two of these)
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
You will also need some extra items to complete the setup.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
* [https://www.amazon.com/gp/product/B01KYHADBY/ 4x M3x20mm flat head machine screws]
* [https://www.amazon.com/gp/product/B00MB3CV6K/ some translucent 1.75mm filament] (optional for light pipes)
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The only part that might be a little bit difficult is installing the light pipes, which you can use a pair of pliers and push the filament through the led holes and use flush cutters to get it to set flat with the rest of the case. Then, you can use a hot air rework gun to get the clear filament to be clear on the ends that were cut.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The case will assemble with the original 3mm nuts from the RetroTINK-2X Classic plexy case and the 3mm screws you obtained. The RetroTINK-2X Classic board will just go inside before you screw it all together.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
'''[http://retrorgb.com/3dprint.html Click here] to check out some more free 3D printed design files.'''
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
'''''fix this link once 3d printed designs are integrated'''''
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
===Rad 2x Cables===
[[File:RAD2x-1024x576.jpg|500px]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
The "Retro Analog to Digital 2x" cables, aka the "RAD2x" are retro HDMI cables supporting most consoles before the Xbox, PS3 and Wii. They are zero lag devices that process the unique "240p" signals of classic consoles properly. They include a switchable filter that smooths out the graphics, which can improve the look for early 3D games and for softening 480i games.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Main RAD2x Sale Page:  [https://www.retrogamingcables.co.uk/RAD2X-CABLES https://www.retrogamingcables.co.uk/RAD2X-CABLES]
====Rad 2x Cable Videos====
Videos that detail each version of the RAD2x:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
{| class="wikitable" 
|-
! <youtube>https://youtu.be/DyE85OFGQpM</youtube>
Intro To RAD2x
! <youtube>https://youtu.be/O4HBvpRIwa4</youtube>
Intro To Nintendo Rad2x
|-
! <youtube>https://youtu.be/a0Ksk9Zru_A</youtube>
RAD2x PlayStation
! <youtube>https://youtu.be/6nZ5yeoUqTc</youtube>
RAD2x: Genesis 2
|-
!<youtube> https://youtu.be/KwXJWkkczKk</youtube>
RAD2x + mClassic Sega Saturn
|
|}
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==Firmware Updates==
RetroTINK products evolve after their release, and if you'd like the newest features and bugfixes you'll need to keep the firmware up-to-date. Also, visit the [https://discord.gg/jE6deAhjCM%20https://discord.gg/jE6deAhjCM Discord Server] and check the experimental channel for latest firmware.
Below are videos to show the update process on multiple OS's:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
{| class="wikitable" 
|-
! {{#ev:youtube|https://youtu.be/Bva0JXLoq7E}}
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Windows Firmware Update
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
! {{#ev:youtube|https://youtu.be/TZuiMCIISIs}}
Mac / Linux Firmware Update
|}
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==Lag Testing==
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
Every RetroTINK is a zero (or near zero) lag device, which have been proven using measurement methods across different devices.  Detailed information and examples can be found [https://www.retrorgb.com/lag-testing-retro-scalers.html here] but for quick visual proof, check out the photo below:
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
[[File:RetroTINK2x.lagtest.jpg|600px]]
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==3D Printed Cases==
* [http://www.retrorgb.com/retrotink2x-3d-printed-case.html RetroTINK2x 3D Printed Case]
</div>

Export translations

Navigation menu

Search