All translations

Jump to navigation Jump to search

Enter a message name below to show all available translations.

Message

Found one translation.

NameCurrent message text
 h English (en)====[[AV:RetroTINK-4K#RGB and Component ADC|GUI - RGB / Component ADC]]====
{| class="wikitable"
! colspan="2" |[[AV:RetroTINK-4K#Sampling|Sampling]] 
|-
|'''Samples per Line'''
|Adjust the samples per-line of the RGB/Component digital to analog conversion.
|-
|'''Decimation Factor'''
|Divides the samples per line by the decimation factor number.
|-
|'''Decimation Phase'''
|Selects which subdivision of the decimation to display.
|-
|'''Sub-Phase'''
|Adjusts the Sub-Phase in 11.25 increments. Can be set as high as "348.75 deg"
|-
|'''Anti-Alias LPF''' 
|Can be set to "Auto (16MHz)", "9MHz (Strong)", "16 MHz (Med)", "35 MHz (Light)", "95 MHz (Min.)" and "Off".
|}
{| class="wikitable"
! colspan="2" |[[AV:RetroTINK-4K#Sync (ADC)|Sync]]
|-
|'''SoG Threshold'''
|Adjusts the Sync on Green Threshold in 11.29 increments. Can be set between "0.00 mV" and "327.42 mV".
|-
|'''Pre-coast'''
|Can be set between 1 and 31.
|-
| '''Post-coast'''
|Can be set between 1 and 31.
|-
|'''Wide Tolerance'''
|Can be set to "On" or "Off". On enables extra sync processing to help with 240p and 288p sources, such as arcade boards or NEOGEO, that may have sync issues due to malformed sync pulses.
This should be turned off for normal use as it may cause artifacts for other systems.
|}
{| class="wikitable"
! colspan="2" |[[AV:RetroTINK-4K#Gain|Gain]]
|-
|'''Pre-ADC'''
|Adjusts the picture gain. Can be set between -0.7 and +0.8.
|-
|'''Red'''
|Adds red to the picture, in increments of 0.008. Can be adjusted between 1.000 and 1.996. 
|-
|'''Green'''
|Adds green to the picture, in increments of 0.008. Can be adjusted between 1.000 and 1.996.
|-
|'''Blue'''
| Adds blue to the picture, in increments of 0.008. Can be adjusted between 1.000 and 1.996.
|}
{| class="wikitable"
! colspan="2" |[[AV:RetroTINK-4K#Offset|Offset]]
|-
|'''Red'''
|Can be set between -100 and +100.
|-
|'''Green'''
|Can be set between -100 and +100.
|-
|'''Blue'''
|Can be set between -100 and +100.
|}
{| class="wikitable"
! colspan="2" | [[AV:RetroTINK-4K#Auto Calibrate|Auto Calibrate]]
|-
|'''Phase'''
|Analyzes the picture to determine the Sub-Phase setting. Works best on detailed images with high contrast details.
|-
|'''Gain'''
|Analyzes the picture to determine the Red, Green and Blue Phase settings. Works best on calibration screens like in the [https://artemiourbina.itch.io/240p-test-suite 240p Test Suite].
|}
Retrieved from "https://consolemods.org/wiki/Special:Translations"