Saturn:Laser Bear Saturn MODE Mount

From ConsoleMods Wiki
Revision as of 14:14, 29 April 2022 by Bumpersam (talk | contribs) (Created page with "A 3D printed mount that adds a clean look and additional features to a Saturn with a Terraonion MODE installed. TODO add photo ==Purchase== * [https://www.laserbear.net/products/mode-saturn-model-1-mount-kit?pr_prod_strat=copurchase&pr_rec_id=f3862d134&pr_rec_pid=6638023999700&pr_ref_pid=6638024098004&pr_seq=uniform Purchase Here] * Pre-Assembled and Kit versions are available * Open source files are also available so you can 3D print your own. TODO add 3D Print Model...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A 3D printed mount that adds a clean look and additional features to a Saturn with a Terraonion MODE installed.

TODO add photo

Purchase

  • Purchase Here
  • Pre-Assembled and Kit versions are available
  • Open source files are also available so you can 3D print your own. TODO add 3D Print Models

Features

  • Adds a button for disk swapping
  • Provides access to the SD card
  • LED Pipe with 3 different options of install (HDD/Access/Power)

Compatibility

NOTE: This info might be out of date as there's only one version up on Laser Bear right now

Different SKUs of the mount are required depending on the Saturn model you have:

  • Model 1 and Model 2 Saturns have different internal layouts, and their mounting brackets are listed as different SKUs at Laser Bear. If you’re not sure which model you have, check this image and look at the Power/Reset buttons.
  • Model 1 Saturns aren’t all the same inside either, and Laser Bear has some options to tailor their bracket to your particular console. TODO Soft Shielding example https://twitter.com/i/status/1315327024500793347

References

Retrieved from "https://consolemods.org/wiki/index.php?title=Saturn:Laser_Bear_Saturn_MODE_Mount&oldid=10171"