3DO:3DORGB Mod
Jump to navigation
Jump to search
The 3DORGB board is an open source mod created by Dan Kunz (Citrus3000psi) to add RGB or VGA output to the all 3DO models except the Anvil Models (Late FZ-10 and Goldstar GDO-202). It also enables 240p output via a physical switch to change between 240p and 480i, even on encoders that do not support the 3DO:240p Mod (BT9101) and never misaligns the output fields.
Depending on the reseller you had bought the kit from, it may include a mini DIN output with a specially designed stackable PCB to align perfectly in place of the RF jack and the 240p switch to sit in place of the RF channel switch.
Official installation instructions for the 3DORGB can be found on Dan's website.