Xbox 360:Exploit Chart

From ConsoleMods Wiki
Jump to navigation Jump to search

Recommended Exploit Chart

The below chart highlights the recommended hack to use on each console.

Dashboard Xenon Zephyr Falcon/Opus1 Jasper Trinity Corona Winchester
≤73712 JTAG JTAG JTAG JTAG N/A N/A N/A
>7371 EXT_CLK3 EXT_CLK RGH1.2 RGH1.2 RGH34 RGH34 N/A

1 Opus motherboards are Falcon motherboards without HDMI.

2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles under 7371 and some on 7371 have an unpatched CB.

3 RGH is not currently working on Elpis Xenons with Samsung memory. A solution is being investigated. It works on all other Xenons.

4 Requires scraping solder mask off of point (more difficult).  

Full Exploit Compatibility Chart

The below chart shows all compatible hacks for each console.

Exploit Xenon Zephyr Falcon/Opus Jasper Trinity Corona Winchester
JTAG ✔️2 ✔️2 ✔️2 ✔️2 ❌1
RGH1 ➖3 ➖3 ✔️ ✔️ ❌1
RGH1.2 ➖3 ➖3 ✔️ ✔️ ✔️7 ✔️7 ❌1
RGH2 ❌5 ➖6 ➖6 ➖6 ✔️ ✔️ ❌1
S-RGH ❌5 ➖4 ➖4 ➖6 ✔️ ✔️ ❌1
RGH3 ➖8 ➖8 ✔️7 ✔️7 ❌1
EXT_CLK ✔️ ✔️ TBD TBD TBD TBD ❌1
R-JTAG+ ➖3 ➖3 ✔️ ✔️ ❌1
R-JTOP ➖3 ➖3 ✔️ ✔️ ❌1

1 Winchester consoles cannot be RGH'd or JTAG'd

2 Must check CB via NAND dump to see if JTAGable. Most - but not all - consoles below 7371 and some on 7371 have an unpatched CB.

3 Only works on some boards and can take minutes to boot if at all - some randomly crash on PLL de-assertion. R-JTAG requires dashboard 14

4 Hangs for unknown reason.

5 RGH2 requires HANA chip, which is not present on Xenon.

6 Unreliable due to requirement of long wires.

7 Requires scraping solder mask off of point (more difficult).

8 Only works on some boards and often has inconsistant boot times if it boots at all. Sometimes it can work perfectly with an instant boot time but could stop glitching after a period of days, weeks, or months.

Legend
Reliable ✔️
Unreliable
Impossible